Design and FPGA-in-loop based validation of predictive hierarchical control for islanded AC microgrid

This paper proposes a decentralized control approach for the flexible operation of an autonomous AC microgrid (MG). AC MG typically consists of two or more voltage source inverters (VSI), capable of simultaneously regulating the voltage at the point of common coupling (PCC) and meeting the local power demand. The classical linear control techniques attain these functions. However, they have many limitations, such as slow transient response, high sensitivity to the parameter variations, and inability to handle the system nonlinearities. This paper aims to address these issues by presenting an improved finite control set model predictive control (FCS-MPC) approach for inverter-based distributed generation (DG). The proposed scheme tracks the voltage trajectory using cost function (CF) over two-step prediction horizons. The proposed control method is employed for the AC MG having two parallel DGs. Droop control is responsible for the power -sharing between the parallel DGs regardless of impedance mismatch at the distribution level of AC MG. The decentralized secondary control is developed to eliminate the deviation in the voltage and frequency caused due to overlooking the primary control. The proposed control scheme has been validated through extensive simulations and real-time controller hardware in the loop tests using an FPGA ZYBO Z7 board. Moreover, the proposed methodology depicts the enhanced transient response, less computational burden than the classic MPC, and shows robustness to parametric uncertainties in terms of THD than hierarchical linear control. The simulations and experimental results visually represent research outcomes, exhibiting the THD of 0.98 % for different dynamic loads, which is within the limit of IEEE and IEC standards. Furthermore, the proposed controller's mathematical stability is further supported by analysis based on the Lyapunov stability theory.