The Development of a Compact Pulsed Power Supply with Semiconductor Series Connection

In this study, high-voltage switching was performed by connecting semiconductors in series. By employing Snubber circuits and voltage divider resistors for each semiconductor, the destruction of the semiconductors was prevented. Additionally, a pulse transformer was installed between the function generator and the photocoupler to isolate the gate circuit, preventing electrical discharges in the circuit and enabling operation at an output voltage of 10 kV and an operating frequency of 200 Hz. The temperature of the semiconductors increased with the increase in operating frequency, which was counteracted by connecting charging resistors and capacitors to limit the current to the semiconductors. As a result, operation at 430 Hz became possible. Furthermore, a saturable inductor (SI) was connected to enable continuous operation. The SI delays the rise of the current and creates a phase difference, thereby reducing the power consumption of the conductor and mitigating the temperature rise, enabling continuous operation at 300 Hz. Moreover, by increasing the number of semiconductor series stages to six, an output voltage of 20 kV was confirmed in tests. By using two semiconductor series circuits, the pulsed power supply that can be changed to any pulse width was also created. As a result, output voltages with arbitrary pulse widths from 5 mu s to 30 mu s were confirmed.