High β‐phase Poly(vinylidene fluoride) Using a Thermally Decomposable Molecular Splint

Abstract An additive, 1,4‐butadiene sulfone (BDS), which generates H 2 SO 3 by in situ thermal retro‐Diels‐Alder decompositions, is used for preparing high β‐phase polyvinylidene fluoride (PVDF) films. Because of preferential multiple non‐covalent interactions of H 2 SO 3 with all‐trans configuration of PVDF, β‐phase PVDF is spontaneously induced without mechanical drawing and/or extensive thermal annealing process. PVDF films cast from PVDF/BDS/water solutions exhibit high β‐phase content ( f β = 95%) when the BDS concentration is only c BDS = 1.0 wt%, which is confirmed by polarized optical microscopy (POM), SEM, Fourier transform infrared spectroscopy (FT‐IR), differential scan calorimetry (DSC), and 2D grazing incidence wide‐angle X‐ray scattering (GIWAXS). Because of the high β‐phase content, PVDF films prepared by using BDS exhibit excellent ferroelectric and piezoelectric properties ( E c = 50 MV/m, P r = 5 µC/cm 2 , and d 33 = ≈‐25 pm/V). Furthermore, a triboelectric nanogenerator (TENG) developed with high β‐phase PVDF film exhibits enhanced performance as 2.5 times higher than neat PVDF film in output charge density, allowing reliable operation of conventional electronic devices.