The Investigation of the Mixture Formation and Combustion Characteristic of the Spray-wall Impingement

Abstract In recent years, investigations into the formation of mixture or combustion characteristics of diesel spray-wall impingement have been summarized. On one hand, the air entrainment strength and fuel concentration distribution in the near-wall area during the spray-wall collision process have been studied. On the other hand, the combustion characteristics of the impinged spray, including ignition and combustion characteristics, have also been discussed. Additionally, the effect of impingement between spray and wall on real diesel engines’ operating condition has been analyzed and summarized. Results showed that increasing the pressure of the injection and shortening the collision distance could enhance the air entrainment strength of spray-wall impingement. Moreover, increasing the injection pressure, shortening the impingement distance, decreasing the environmental pressure, increasing the wall temperature, and reducing the nozzle diameter all improved the mixture formation. Conversely, reducing the environmental temperature, decreasing the nozzle diameter, and increasing the impingement distance all reduced the concentration of soot, and even achieved no soot formation. Under real diesel engine operation conditions, some of the soot formed in the spray-wall collision and deposited on the wall. The structure of these deposits was mainly a simple cluster structure composed of several basic particles, and the porous structure of the deposits was conducive to the oxidation of soot and reduced the deposition rate.