Embryo-to-lamella transition of grain boundary twins in magnesium

A combined experimental and computational analysis is performed to investigate the less commonly studied embryo-to-lamella transition of deformation twins in magnesium. This work aims to understand the structural variables controlling the embryo-to-lamella transition from grain boundaries. Statistical analysis of hundreds of early-stage twins in the lightly deformed microstructure reveals a prevailing wedge shape, with a much thicker base along the grain boundary (GB) where they originate and a thinner tip terminating in the crystal. The analysis also shows that the GB base is super thick and identifies a minimum GB twin thickness among all early-stage twins that is about one micron. A crystal plasticity-based full-field model is employed to calculate the driving forces to migrate the boundary of a three-dimensional GB twin embryo. The stress analysis, considering a full range of embryo shapes and neighboring grain orientations, indicate that the twin embryo is most likely going to form a wedge shape when it first propagates. The calculations predict that the thickness of the embryo at the GB needs to be significantly larger than its length into the crystal in order to propagate into the crystal. The analysis finds that the more aligned the twin embryo variant is with basal slip in the neighboring grain, the thinner the twin embryo needed for propagation. (c) 2023 Chongqing University. Publishing services provided by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/ ) Peer review under responsibility of Chongqing University