Research on the Impact and Control Techniques of Gangue Rib in Hard Roof

Blocking gangue support is a key link in gob-side entry retaining by roof cutting and pressure release (GERRC), and its stability is related to the success or failure of the retained roadways. Due to the severe dynamic pressure and high hardness of the gangue during hard roof collapse, serious bending and toppling instability of the section steel can easily occur. Since potential safety hazards exist in gangue ribs, the 1105 panel of the Qiuji Coal Mine is used as the engineering background, a mechanical model of gangue impact is constructed based on four forms of gangue motions, and the failure of a blocking gangue support structure under hard roof conditions is explored with ABAQUS software. The results indicate the following: (1) Section steel experiences transient bending by gangue impact, and will further bending failure or toppling instability occurs under roadway roof subsidence and gangue compression. (2) This impact causes the steel bar mesh to generate a significant transient lateral force, which couples with gangue compression, resulting in instability and slip of the section steel. To this end, three optimized components have been proposed, sliding yield I-steel, reinforced bolts and link components, and the optimal parameters are obtained. The results of the numerical simulation and field tests suggest that the new blocking gangue support structure has a good support effect, and the field deformation of the gangue rib is reduced by 86%. No failure of I-steel occurs with the new blocking gangue support structure. This study can provide a reference for the control of gangue ribs in GERRC under similar geological conditions.