Microstructural regulation and mechanical behavior of asymmetrically extruded high-content TC4_p reinforced AZ31 composite

Asymmetric extrusion (AE) is frequently used to weaken the texture of magnesium (Mg) alloys to improve their mechanical properties. In this paper, to explore the influence of asymmetric extrusion on the microstructure and mechanical properties of Mg matrix composites (MMCs), we synthesized TC4/AZ31 composite sheets via ball milling coupled with sintering and then various extrusions (including conventional extrusion (CE), transverse- directional AE (TDE), and normal-directional AE (NDE)). The differences in microstructure and performance among the three processed samples were compared and analyzed using SEM, XRD, EBSD characterization and tensile testing. The results showed that the asymmetrically extruded samples achieved better mechanical properties compared to their CE counterparts. It found that the grain reftnement was relatively significant and texture evolution was dispersed in AE samples compared to the CE ones, which was attributed to the TC4 particle (TC4) disturbance and extra asymmetric shear of matrix flow. Three different macro-textures were obtained in various extruded processes, and the micro-texture of each sample changed in diverse regions. Based on grain orientation spread (GOS) analysis, the introduction of TC4, resulted in dynamic recrystallization (DRX) and particle-stimulated nucleation (PSN) effects during the AE process at 350 degrees C. The mechanisms of the combination of ductility and strength in the AE-processed sheets were related to the finer grains, high Schmid factor (SF). evenly distributed dislocations and scattered texture. This work can also provide the feasibility and prospects of applying asymmetric extrusion to MMCs.