Thermohydraulic and Irreversibility Analyses of Swirl Flows Utilizing Distorted Radial Fins: Entropy Generation and Entransy Dissipation Evaluation

The current investigation analyses the convective heat transfer performance, entropy generation, and entransy evaluation of swirl flows generated by distorted radial fins (DRF). As swirl flows and various vortical structures induce large temperature gradients, second law and entransy analyses are necessary to thoroughly evaluate their true thermodynamic influence on heat transfer enhancement. The results indicated that due to the influence of swirl flows and vortices, all angles of the DRF were capable of inducing intense fluid mixing, thinner thermal boundary layers, and turbulent eddies. It was found that overaggressive swirl flows may hinder local heat transfer performances, by enclosing low-velocity heated fluids within the thermal boundary layers. However, as these overaggressive swirl flows and strong vortices propagate downstream, beneficial fluid mixing was eventuated, favouring heat transport over large regions. In terms of thermal performances, the maximum heat transfer enhancement was exhibited by the alpha=45 degrees DRF, improving the Nusselt numbers up to 59.3%. Accordingly, the highest performance evaluation criterion (PEC) of 1.269 was obtained by the alpha=45 degrees DRF at the Reynolds number 2389, attributed to the centrifugal effects of the swirl flows. Optimal entropy generation numbers were also exhibited by the alpha=45 degrees DRF at the highest studied Reynolds number, reducing total entropy generation by 36.81%. Lower entransy thermal resistances were also accredited to greater DRF angles due to the intense swirl effects. In essence, the study concludes that the effects of swirl flows and vortices significantly enhance heat transfer, whilst reducing both entropy generation and entransy dissipation rates, leading to optimal thermal performances.