Application and analysis of superconducting magnetic eddy current heater used in wind thermal power generation system

In order to cope with the grid fluctuation caused by large-scale wind power connected to the grid, the wind thermal power generation system has been proposed and extensively studied. The wind thermal power generation system uses a wind turbine to drive a heat generation device to heat the heat storage medium, which is further exchanged to drive a turbine to generate electricity. A superconducting magnetic eddy current heater (SMH) is proposed for the characteristics of wind thermal power generation system, which uses non-resistive, large current-carrying superconducting coils for excitation, and has high output efficiency and power density. The working principle of magnetic eddy current heating is analysed, and the structure of SMH with no ferromagnetic material and two heating screens inside and outside is proposed according to the characteristics of SMH. An analytical model of the SMH is established, and the influence of the structure and materials of the SMH on the magnetic field distribution is analysed. Based on this, a 22-pole SMH was designed and analysed for output power at 10-20 rpm. A three-dimensional magnetism-stress combined analysis model of SMH is established, and the strain and stress characteristics of SMH are simulated under the condition of maximum output power, which verifies the feasibility of the mechanical properties of existing superconducting materials for application in SMH. A wind thermal power generation system based on magnetic eddy current heating is constructed, in which the magnetic eddy current heating device adopts superconducting induction heating method and use non-ferromagnetic material. Inner and outer metal heat screens are set for heat generation and environmental magnetic shielding.image