Differences in illite soil macropore morphology caused by Ca²⁺ and Mg²⁺ under Na+ presence

Cations in soil solutions affect soil structural stability and thus soil quality and health. Ca2+ and Mg2+ could alleviate soil clay dispersion by replacing Na+, which was the main driver. However, Mg2+ could also cause soil disaggregation and weaken aggregate integrity. Currently, most studies on Ca2+ and Mg2+ mainly examine soil hydraulic characteristics and clay particle dispersion, rather than macropore geometry. We analyzed the impact of Ca2+ and Mg2+ on soil macropore morphology by measuring macropore length, aspect ratio, and area indices. An indoor soil column experiment was set up, and irrigation water was prepared with the same electrical conductivity (4 dS m(-1)) and different cation compositions (Na+-Ca2+ (NC), (Na)(+)-Ca2+-Mg2+ (NCM), Na+-Mg2+ (NM) and Na+-only (N) were added), and deionized water as the control (CK). The results indicated that N had the highest soil suspension turbidity among all treatments, with NM being higher than NC. The highest percentage of soil macropore aspect ratio < 2.0 was found in N, and the highest percentage of soil macropore aspect ratio for NCM was found in > 2.0. The macropore anisotropy of NM was closer to 1.0, and anisotropy of NC was closer to 0. The soil macropore morphology of NC developed towards a spherical shape, while the macropores of NM might extend along one or several similar directions. For Na+-Ca2+ dominated soil, Ca2+ mainly affected the macropore area. However, for Na+-Mg2+ dominated soil, Mg2+ primarily influenced the number of macropores. Ca2+ inhibited the negative effects of Na+, but Mg2+ promoted unidirectional extension of macropores, posing a risk of soil cracking. This study provided a better understanding to explore the differences in the effects of different cations on soil pore structure and helped to provide guidance for field water management.