Well perforation optimization using an abrasive jet technique to create oriented slotted channels in terrigenous reservoirs

Various casing perforation methods are used to ensure a hydrodynamic reservoir-to-well connection. However, perforated wells often do not perform satisfactorily during production. This is largely due to a decrease in the permeability of the near-wellbore formation as a result of casing perforation work. Studies and analysis of existing casing perforation methods have shown the effectiveness of abrasive jet perforation. The paper presents the results of numerical modeling to optimize the layout of slot channels during the abrasive jet perforation (AJP) of terrigenous productive object. Geomechanics analysis of the influence the formation scheme and orientation of the slotted channels in the productive layer during abrasive jet perforation on the permeability of terrigenous reservoirs of the oil fields in the Perm Krai was performed. The disadvantages of widespread methods of exposing perforation are described and the advantages of abrasive jet perforation based on geomechanical modeling are revealed. The calculations carried out on the placement of slotted channels showed that the distance between the systems of slotted channels is not important, since they weakly interact with each other in height with standard schemes. It was established that the best placement scheme for jet slot channels is a system of four slot channels shifted along the length of the well to the height of the slot channel with a phasing of 90°. Comparative calculations of the reservoir permeability of the near-well zone for various perforation methods have been performed.