Bottom-up production of injectable itraconazole suspensions using membrane technology

Bottom-up production of active pharmaceutical ingredient (API) crystal suspensions offers advantages in surface property control and operational ease over top-down methods. However, downstream separation and concentration pose challenges. This proof-of-concept study explores membrane diafiltration as a comprehensive solution for downstream processing of API crystal suspensions produced via anti-solvent crystallization. It involves switching the residual solvent (N-methyl-2-pyrrolidone, NMP) with water, adjusting the excipient (d alpha-Tocopherol polyethylene glycol 1000 succinate, TPGS) quantity, and enhancing API loading (solid concentration) in itraconazole crystal suspensions. NMP concentration was decreased from 9 wt% to below 0.05 wt% (in compliance with European Medicine Agency guidelines), while the TPGS concentration was decreased from 0.475 wt% to 0.07 wt%. This reduced the TPGS-to-itraconazole ratio from 1:2 to less than 1:50 and raised the itraconazole loading from 1 wt% to 35.6 wt%. Importantly, these changes did not adversely affect the itraconazole crystal stability in suspension. This study presents membrane diafiltration as a one-step solution to address downstream challenges in bottom-up API crystal suspension production. These findings contribute to optimizing pharmaceutical manufacturing processes and hold promise for advancing the development of longacting API crystal suspensions via bottom-up production techniques at a commercial scale.