Pressure Analysis of Onshore and Offshore Shale Gas Reservoirs under Constant-Rate Condition Considering Thin Sandstone Layer and Interlayer Cross-Flow

The extraction of shale gas from onshore and offshore shale gas reservoirs will play an important role in meeting China’s future energy needs, which will not only help alleviate the energy crisis but also contribute to climate change mitigation. As for the target shale formation enriched by thin sandstone layers in typical basins, an analytical calculation method is proposed to perform pressure analysis for multi-layer shale gas reservoirs considering the adsorption–desorption characteristics of shale layer and the interlayer cross-flow. Firstly, the changes in storage capacity and flow resistance are obtained by using the distance of investigation equation. According to the electrical analogy, the equivalent total storage capacity and flow resistance can be calculated considering the sandstone-shale crossflow. Because production from one time step to the other causes depletion of the storage capacity, the reservoir pressure in different time steps can be calculated based on the material balance equation. Numerical models have been constructed based on three typical reservoir lithology combinations (sandstone-shale, shale-sandstone-shale and sandstone-shale-sandstone) to validate the accuracy of the proposed analytical calculation method. Furthermore, three important factors (porosity, the ratio of horizontal/vertical permeability (kh/kv) and the layer thickness) have been selected for the sensitivity analysis to verify the stability. The comparative results indicate that the proposed analytical calculation method is suitable for pressure analysis in shale gas reservoirs containing thin sandstone layers. It will provide theoretical support for the further enhancement of the production of this type of gas reservoirs.