Microstructure Modification of Alumina Prepared by Water-Stabilized Plasma Spraying Method Using Al-Cu-O Reaction

To improve the strength of Al2O3 specimens produced using the water-stabilized plasma spraying technique (WSPSAO), this study investigates the effect of structural modification on the mechanical properties of WSPSAO using the Al-Cu-O reaction between the metal, atmospheric oxygen, and base material. A Cu-powder layer is applied to the specimen surface, melted, and oxidized at high temperatures. It penetrates into the specimen, resulting in significant microstructural modification deep in the specimen. After modification, uniaxial Al2O3, CuO, Cu2O, and CuAl2O4 are formed in the specimen, resulting in a denser and more uniform structure than that of the original material. The bending strength of the coated surface is 145 MPa, and that on the opposite side of the coated surface is 118 MPa, which is 130%–180% higher than the original strength of the base material.