Frictional evolution process and stability properties of Longmaxi shale under fluid injection

The frictional stability of rocks is fundamental in controlling the instability and activation of faults. Given the strong correlation between seismic events in the Sichuan Basin of China and hydraulic fracturing for shale gas extraction, we conducted a series of velocity-stepping friction experiments with Longmaxi shale from the Changning shale gas extraction block under fluid injection. The experimental results indicate that the frictional process of Longmaxi shale can be divided into four distinct stages and the effective normal stress can demonstrate the influence of injection pressure. Additionally, the phenomenon of a decreasing friction coefficient μ with increasing effective normal stress can be explained by the frictional adhesion theory and a competitive mechanism between the deformation of asperities and microscopic dilatant slip. As the injection pressure increases, the friction state of Longmaxi shale transitions from velocity-strengthening to velocity-weakening, which is beneficial for potential seismic slip. After friction, the fracture surface experiences wear, and the surface morphology of the left and right parts exhibits a symmetrical distribution. With increasing effective normal stress, the morphological evolution of fractures becomes more prominent, which is related to the variation in the effective contact area. Based on the experimental results, we propose that the uneven distribution of fluid pressure on the Longmaxi shale fracture may also contribute to the transformation of frictional stability. When studying the frictional properties of rocks under fluid injection, it is also necessary to focus on the evolution of fluid pressure distribution on the fracture surface during the frictional process.