Enhanced Separation Performance of Graphene Oxide Membrane through Modification with Graphitic Carbon Nitride

The treatment of tritiated nuclear wastewater is facing greater challenges with the continuous expansion of the nuclear industry. The key to solving the issue of detritium in low-abundance tritium water lies in developing highly efficient and cost-effective hydrogen isotope separation technology. Graphene oxide (GO) membrane separation method exhibits greater potential compared to other existing energy-intensive technologies for the challenging task of hydrogen isotope separation in nuclear wastewater. In recent years, researchers have explored few strategies to enhance the performance of graphene oxide (GO) membranes in hydrogen isotope water treatment, recognizing the current limitations in separation efficiency. In this study, the GO/g-C3N4 composite membrane has been successfully employed for the first time in the separation of hydrogen isotopes in water. A series of GO membranes were prepared and their performances were tested by a self-made experimental device. As a result, the separation performance of the GO membrane was enhanced by the modification with graphitic carbon nitride (g-C3N4). The permeation rate of the GO/g-C3N4 membrane was higher than that of the GO membrane, while maintaining a high separation factor. Our study also demonstrated that this phenomenon can be attributed to the changes in membrane structure at the microscopic scale. The H/D separation factor and the permeate flux of the composite membrane containing g-C3N4 of 6.7% by mass were 1.10 and 7.2 x 10-5 g center dot min-1 center dot cm-2 are both higher than that of the GO membrane under the same experimental conditions, which is promising for the isotope treatment.