Plasma parameters correction method based on plasma image-spectrum fusion for matrix effect elimination in LIBS

Matrix effect is one of the obstacles that hinders the rapid development of laserinduced breakdown spectroscopy (LIBS), and it is currently a hot, challenging, and focal point in research. To eliminate the matrix effect, this study proposed a plasma parameters correction method based on plasma image -spectrum fusion (PPC-PISF). This method corrects the total number density, plasma temperature, and electron number density variations caused by matrix effect using effective features in plasma images and spectra. To verify the feasibility of this method, experiments were conducted on pressed and metal samples, and the results were compared with those corrected by image -assisted LIBS (IA-LIBS). For the pressed samples, after correction by PPC-PISF, the R2 of the calibration curves all improved to above 0.993, the average root -mean -square error (RMSE) decreased by 41.05%, and the average relative error (ARE) decreased by 59.35% evenly in comparison to IA-LIBS. For the metal samples, after correction by PPC-PISF, the R2 of the calibration curves all increased to above 0.997. Additionally, the RMSE decreased by 29.63% evenly, the average ARE decreased by 38.74% compared to IA-LIBS. The experimental results indicate that this method is an effective method for eliminating the matrix effect, promoting the further development of LIBS in industrial detection. (c) 2024 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement