Evolution of interfacial phases between Al alloy and high entropy alloy during annealing

While the interfacial phases between Al and high-entropy alloy (HEA) share the same types as that between Al and steel, it has been found previously that the thermal stability of the Al-HEA interfacial phases is significantly higher than that of the Al-steel interfacial phases. To further elucidate the reason for the exceptional thermal stability of Al-HEA interfacial phases, this study investigated the evolution of the interfacial phases formed between Al alloy and FeCoCrNiMn HEA during annealing. An Al-FeCoCrNiMn thin film diffusion couple was extracted from a friction stir lap welding (FSLW) joint by focused ion beam and then annealed at 400 °C. An amorphous layer is formed initially at the interface due to the high strain rate deformation during FSLW. The amorphous layer remained even after prolonged annealing at 400 °C (~0.72 Tm of Al alloy) for 60 min with very limited thickening (from 50 nm to 55 nm), showing remarkable thermal stability at the relatively high temperature. Al13Fe4-type IMC with the Fe site occupied by Fe, Co, Cr, Ni and Mn first nucleates at the interface between Al alloy and amorphous layer. With the annealing time extended to 180 min, the amorphous layer is partially transformed into Al5Fe2-type IMC. The rate constant for the thickening of the reaction layer at the Al/FeCoCrNiMn interface is 0.03 μm∙min1/2, which is much smaller than (only 0.02 times) that at the Al/steel interface under similar annealing condition. The high thermal stability of Al-HEA interfacial layer is thus attributed to the slow kinetics in crystallization of the initially formed amorphous layer, the barrier effect of amorphous layer for interdiffusion, and the reduced diffusivity inside of IMCs caused by significant fluctuations in lattice potential energy due to high-density doping with HEA elements. This finding provides new insights into the fabrication of thermally stable Al-HEA hybrid structures suitable for service conditions involving high-temperature exposure.