A Micromachined Joule-Thomson Cryocooler for Ice Lithography

A micromachined Joule-Thomson cryocooler has been designed as a cryostage for ice lithography, which allows high-pressure nitrogen throttling to liquefy and fast cool samples with low vibration. The sample can be cooled down to 99.5 K in 30 min and then heated up to room temperature in 10 min. Compared with previous cooling systems based on liquid nitrogen, the Joule-Thomson cryostage has resulted in a significant 90% reduction in cooling time and a decrease in operating temperature by 30 K. Besides, the nitrogen mass-flow rate beneath the sample remains <20 mg/s to minimize vibration. The measured peak-to-peak amplitude at the minimum temperature is about 5.6 nm. As the first cooler integration within an ice lithography system, this Joule-Thomson cryostage not only enables the exploration of a wider range of ice resists, but also can be applied in kinds of microscopes for helping characterize materials at cryogenic temperatures.