Buried junction and efficient carrier separation in CdSexTe1−x/CdTe solar cells

Alloying CdTe absorbers with Se is a critical advancement for the fabrication of highly efficient CdTe thin-film solar cells. Herein, the role of the Se concentration gradient in CdSexTe1−x/CdTe solar cells is stressed in addition to the decreased bandgap and passivation effect of Se. The buried graded CdSexTe1−x at the front interface of the device was stripped and analyzed by quasi in situ x-ray photoelectron spectroscopy depth profiling. A serial shift of Fermi level toward the valence band was probed as the Se concentration decreased in the graded CdSexTe1−x absorber, revealing the presence of n-type CdSexTe1−x region near the front contact. Kelvin probe force microscopy characterizations and voltage-dependent photocurrent collection analysis further confirmed the existence of a buried junction in the graded CdSexTe1−x absorber. The CdS-free CdTe solar cell with a graded CdSexTe1−x/CdTe absorber fabricated in this study showed an efficiency of 17.6%. These results indicated that the non-uniform distribution of Se introduced a built-in field in the graded CdSexTe1−x absorber and enabled efficient separation of photogenerated carriers, yielding high-performance CdTe solar cells in the absence of a conventional n-type CdS window layer. This study deepened the understanding of the performance enhancement in Se-containing CdTe solar cells and provided new ideas for further performance optimization.