Shear Wave Anisotropy Response Characteristics of Laminated Shale and Its Correction Methods

Laminated shale exhibits strong anisotropic characteristics in horizontal wells, significantly affecting the application of shear wave travel time data. Using equivalent medium theory and the elastic wave equation, we constructed a physical model for laminated shale, simulating the impact of lamination angle and lamination density on shear wave velocity and shear wave anisotropy coefficient. We established the relationship between the shear wave anisotropy coefficient and the cosine of the lamination angle. The simulation results indicate that shear wave velocity decreases with an increase in lamination angle and density, while the shear wave anisotropy coefficient gradually decreases with an increase in lamination angle and initially increases and then decreases with an increase in lamination density. Moreover, it exhibits a power exponential relationship with the cosine of the lamination angle. After correction, the minimum horizontal principal stress and fracture pressure calculated from shear wave data show an average relative error reduction of 6.72% and 7.77%, respectively, compared to measured data. This demonstrates that the correction method effectively eliminates the impact of laminated shale anisotropy on shear waves.