Furfuryl-pyridinium-functionalization of Flaxseed Gum for Effective Methylene Blue Removal from Aqueous Solution

This study describes the modification of flaxseed gum (FSG) via furfural to obtain a furfuryl-pyridinium modified adsorbent (Flax-Py) with improved adsorption characteristics towards methylene blue (MB) versus results obtained for unmodified FSG. Materials characterization was achieved via complementary spectral methods (NMR, XPS, FT-IR, Raman, and XRD) as well as thermogravimetric analysis (TGA) and ζ-potential measurements. Synthetic modification of FSG to yield Flax-Py that led to enriched N-content (2.75 atom-% versus 0.76 atom-% for FSG), and the conversion of furfuryl to pyridinium was incomplete (ca. 50 %), where both moieties were identified. The adsorption isotherms at pH 7 showed that FSG possessed favorably high MB adsorption capacity (ca. 540 mg/g); while Flax-Py was notably lower (167 mg/g). Flax-Py facilitated 100% MB removal at low dye concentrations (1-10 mg/L) versus 50 % MB removal for the FSG bioadsorbent. Further, Flax-Py showed moderate loss of adsorption with MB (ca. 12-16% dye removal) after five regeneration cycles. Flax-Py revealed improved settling characteristics (time, density, gelation, and solubility) that facilitate enhanced phase separation of FSG fractions by circumventing the need for centrifugation. The adsorption mechanism was attributed primarily to H-bonding effects with secondary contributions due to electrostatic interactions (negative ζ-potential above pH 4.2). This study successfully modified FSG to obtain an improved adsorbent (Flax-Py) attaining nearly quantitative MB dye removal at environmentally relevant concentrations (< 15 mg/L).