Designing the Heat Treatment Process for Mg-10Gd-4Y-xZn-0.6Zr (wt.%) Alloy: A Study on the Transformation of Microstructure and Properties

Heat treatment of Mg10Gd-4Y-xZn-0.6Zr (x=0, 1, 2 wt.%) alloys has been optimized based on thermodynamic calculations and experiments. The phase transformations during the heat treatment and their effect on the mechanical properties of the alloys were discussed. Using thermodynamic calculations, three solution treatment temperatures of 475 °C, 500 °C, and 525 °C were determined, and the phase transformation under these temperatures were calculated and characterized, the results aligned well with experimental results. The optimal solution treatment technology was determined to be 500 °C for 18 hours. After solution treatment, experimental alloys were subject to isothermal aging at 225 °C, the peak aging time for the experimental alloys was established. The microstructure under peak-aged state of the alloy was characterized, revealing a co-existed β’ and β1 phases. The GWZ1041K alloy, after peak aging treatment, exhibited optimal mechanical properties, with a tensile strength, yield strength, and elongation of 392.3 MPa, 249.3 MPa, and 5.7%, respectively. The study further analyzed the reasons for the microstructure transformation during the heat treatment and their influence on mechanical properties.