Production of Low-Co2 Ternary Binder Using Red Sandstone, Cement, and Granulated Blast Furnace Slag: A Comprehensive Performance Analysis

Red sandstone is rich in reserves, and using it as a mineral admixture to partially replace cement can save cement consumption and reduce carbon dioxide emissions. This study uses spectral characterization, electron microscopy image analysis, mechanical property testing and other methods to study the fluidity, compressive strength, heat of hydration, carbonation degree, microstructure and thermal damage of composite cement-based materials containing red sandstone and slag. The experiment results showed that in ternary mixed cement, the composite cement mixed with 5% slag and 10% red sandstone shows similar flow properties to cement paste. Moreover, as the mineral content (red sandstone and slag) increases, the dissolution peak of the Al phase appears earlier, and the degree of carbonation increases. Furthermore, the CO2 emissions per unit strength gradually decrease. After 28 days of curing, thermal damage experiments demonstrated that the strength of the sample increases by more than 3.6% when the mineral content is greater than 15% at 200℃. Samples were subjected to 600 °C and 900 °C, and the strength of the red sandstone sample with a content of 15% decreased significantly. Moreover, as the temperature increases to (600 °C and 900 °C), the lattice of CnS becomes more and more ordered.