Sulfur quantum dots (SQDs) hold great potential in advanced optical materials and biomedical fields, but their existing synthetic methods suffer from high-energy consumption and prolonged reaction times, limiting large-scale production. Here, we report a fluidized-like pumping air method for the rapid, low-cost preparation of SQDs at room temperature by oxidizing polysulfide ions with effervescent air. This approach reduces total energy consumption by 93% and shortens the reaction time to <1 h, as confirmed by first-order kinetic and thermodynamic analyses. The resulting SQDs exhibit a relative quantum yield of 12.7%. Leveraging their amphiphilic surface ligands, SQDs were further processed into fluorescent polymer composites, including films, hydrogels, and fibers, demonstrating versatile material processability. Notably, SQDs serve as an effective intracellular hydrogen peroxide probe and cell imaging agent, showing concentration-dependent fluorescence quenching with high linearity (R-2 > 0.99) and biocompatibility (cell viability >80% at 0.5 mg/mL for 72 h). This work provides a sustainable strategy for scalable SQD synthesis while expanding their applications in functional materials and bioimaging.
Usually, the interfacial problem of electrode materials is considered one of the main factors affecting the electrochemical performance. The construction of heterostructures is an important approach to regulating the material interface. In recent years, manganese-based materials based on aqueous zinc-ion batteries have received great attention, but single-phase structures of manganese-based materials have their limitations. In contrast, heterojunction materials incorporate the advantages of two-phase or multiphase structures to realize synergistic effects. This work realized the rapid transport of zinc ions by the construction of heterojunction interfaces. The Mn3O4/MnCO3 heterostructure material prepared by the hydrothermal method exhibits excellent electrochemical properties. The specific capacity was 91.3 mAh g-1 after 6000 cycles at a current density of 3 A g-1, and the capacitance contribution was as high as 93.6% at a scan rate of 0.2 mV s-1. Electrochemical characterization, ex-situ X-ray diffraction (XRD)/X-Ray Photoelectron Spectroscopy (XPS) analyses, and density of states simulations confirm that the Mn3O4/MnCO3 heterojunction materials combine the high stability of Mn3O4 with the high capacity of MnCO3, making it suitable to be used as the cathode material for aqueous zinc-ion batteries.
Toughness and stiffness are two parameters that determine whether a polymer can be used as an engineering material.Therefore,polymer toughening and stiffening have been continuously attractive and important topics for both polymer science and engineering.The brittle-ductile transition(BDT)of a polymer plays an important and special role in high-impact polymer preparation and its application because the critical BDT point is the reference point for designing a ductile polymer and the limit point for its application as a ductile material.Moreover,the BDT point also determines the balance between the toughness and rigidity of toughened polymers.In this review,factors such as morphology,properties of the toughening particles and matrix polymer,temperature,and deformation speed that can affect the BDT of particle-toughened thermoplastics are first summarized.Subsequently,the model and theory concerning the relationships among these factors at the critical BDT point are systematically introduced in detail.Finally,recent progress in designing and preparing high-impact polymer composites with balanced toughness and rigidity on the basis of the model and theory of the brittle-ductile transition is introduced and discussed.
Conductive polymers are essential materials for flexible electronics and energy storage, yet their electrical performance is highly sensitive to multivariate synthesis parameters that are difficult to optimize experimentally. Here, we develop a machine learning framework that accurately predicts polymer conductivity based on nine key synthetic variables. Among five tested algorithms, EXtreme Gradient Boosting (XGBoost) achieves the highest predictive accuracy (test R 2 = 0.933), while Light Gradient Boosting Machine (LightGBM) shows strong performance with minimal overfitting. SHapley Additive exPlanations (SHAP) analysis reveals that dopant species is the dominant determinant of conductivity (59.85%), followed by oxidant species (17.5%) and polymer type (8.5%). The model further uncovers critical nonlinear relationships, including conductivity maximization at 30-60 degrees C, a sharp decline beyond a 2 mol/L dopant concentration, and negligible dependence on reaction duration after equilibrium. Notably, optimal conductivity arises under synergistic conditions of elevated reaction temperature (>80 degrees C) and low oxidant concentration (<0.2 mol/L), which promote molecular alignment and enhance charge carrier mobility. Our findings highlight that dopant-driven acid-base doping strength, rather than classical acid-base doping strength, serves as the primary factor controlling carrier transport in conductive polymers. This insight provides the design principles for organic electronic materials and demonstrates how machine learning can accelerate materials discovery and optimization.