上海安美特铝业有限公司专业经营预氧化铝卷材。公司通过不懈的努力,凭借国际先进的技术力量,使安美特品牌铝材成为业界知名产品,并以品牌形象走向国内外市场,在不断的开拓创新中建立起了一整套完备的产品体系。 安美特公司已通过ISO9001认证,所有产品均已通过SGS环保体系认证。公司确保以“一流的技术,先进的设备”为客户打造可信赖的品质保证。
Heterogenous integration enables increased functional density by integration of multiple chips or components into a single package. This integration leads to an increase of the overall package size and is a challenge for the dimensional stability of the package. One potential solution to this challenge is the application of new materials like glass to provide unparalleled flatness and dimensional stability. Inclusion-free filling of high aspect ratio (HAR) through glass vias (TGVs) is crucial for significantly enhancing the performance and reliability of advanced electronic packaging. This study explores the application of pulse reverse electroplating (PRE) to achieve defect-free copper electroplating in HAR TGVs. Defect-free filling of HAR TGVs is vital for the performance and reliability of advanced electronic devices. Addressing this issue directly impacts the efficiency and longevity of the packaging products. The PRE technique, which utilizes alternating current pulses combined with advanced DC electroplating processes, effectively mitigates the formation of inclusions and voids, ensuring excellent bridging and superconformal filling even in challenging structures. The study examines more complex PRE techniques to achieve conformal filling for small features in interposer-like structures. Our study shows that these methods can provide inclusion-free filling for certain through hole dimensions, as verified by x-ray investigations. The data demonstrates PRE’s potential to enhance structural integrity and improve thermal and electrical conductivity. Future research will focus on refining these processes to accommodate diverse structure dimensions, further enhancing their reliability and versatility. By refining the techniques and exploring new combinations of electroplating methods, including testing new in-house synthesized molecules with tailored electrochemical performance, we aim to further enhance the versatility and reliability of HAR TGV filling processes to meet the evolving demands of advanced electronic packaging.
Electroless Copper processing has been widely adopted within the general PCB and package substrate industries for many years due to its wide process window and proven product reliability. So much so, that it is now generally recognised as the ‘industry standard’ as a means of facilitating multilayer PCBs. While there have been many modifications made to specific baths in order to develop process capability and further widen its application base, the process as a whole has remained ‘more or less unchanged’ for many years. Typically, the process contains three major application steps, firstly, a ‘desmear’ to remove unwanted resin residues following the previous drilling operations, then a Palladium based ‘activation’ which facilitates the subsequent ’electroless Copper ’deposition. The stability and successful performance of such a process has been widely published, although one issue that to date remains unresolved, has been successfully identifying viable alternatives to the Pd containing activation step. Such activator chemistries have steadily seen an increase in their associated costs, up to the current situation where the Pd metal costs are now an appreciable portion of the overall electroless Copper process costs. While there have been limited publications investigating alternatives to Pd based activation, typically based on Silver or Copper, none appear to have been sufficiently successful to achieve any level of industrial acceptance. In this paper, we discuss the technical issues that have been overcome in order to develop an activator system that is based on Copper colloids. This solution has been shown to offer a process stability that has not been achieved with previous Cu based activation steps, where due to colloid agglomeration and/or oxidation, unacceptably short solution lifetimes have been encountered. We also characterise this fully Cu based process on a range of PCB and package substrate relevant dielectric materials, in order to demonstrate that the electroless copper process as a whole remains comparable to one using the existing Pd based technology, with no loss in physical or thermo-mechanical performance.
The layer combination Ni/Pd/Au, also named as ENEPIG (Electroless Nickel, Electroless Palladium, Immersion Gold) is a well-established final finish for high performance and high solder joint reliability in packaging applications. The coating properties are thereby defined by the type of electrolytes which are used for the plating. A specific focus lies on the palladium and gold deposit which play a major role in regards to the final finish reliability. In particular if high thickness of palladium and gold are required, the use of a pure palladium deposit and a gold electrolyte with a partial autocatalytic reaction is highly recommended. The pure palladium plating process as well as the mixed reaction gold plating process are both available in the market for several years already and have found their way into the packaging industry. In this paper a comparison of the different electrolytes for Ni/Pd/Au plating will be given and the performance in regards to solder joint reliability, IMC formation and bonding behavior will be judged. Two new processes for pure palladium plating and mixed reaction gold plating are introduced and compared to the processes which are present in the market. The new processes offer benefits in the efficiency of the plating process, allow to save cost by the reduced precious metal content and provide highest reliability for final finishes in the packaging industry. Data for different plating conditions are presented and the impact of the different conditions such as thickness variation or aging are shown and discussed. With the new types of palladium- and gold- plating electrolytes a new generation of Ni/Pd/Au process can be introduced, which allows the combination of high process robustness, reduced precious metal cost and high final finish reliability in packaging applications.
Advanced packaging solutions and heterogeneous integration are key technologies to enable devices with higher performance and decreasing form factor. In this context, packages with high I/O densities are required, especially for high performance computing, which imposes restrictions to the pitches of the interconnects. Conventional bonding technologies, including wire bonds and flip chip are limited to larger pitches and, therefore, not suitable to meet the requirements of upcoming packaging technologies with respect to I/O densities. Direct copper-to-copper interconnects are supposed to fill this gap and to allow such small pitches of 5μm or even below. However, formation of such bonds usually requires high temperatures and pressures. Temperature-sensitive devices like DRAM restrict the maximum temperature that can be applied to the packages. Thus, processes and copper material are required, which allows proper bond formation at relatively low temperatures. In this context, hybrid bonding was discussed and involves initial bond formation via the dielectric at room temperature followed by copper-to-copper bonding at moderately elevated temperatures. The copper material is usually prepared by electrodeposition and the properties of the respective deposits may be modified by properly designed organic additives as well as process parameters. In Literature, different electrolytic deposition processes were discussed with respect to suitability of their respective microstructures to typical hybrid bonding process flows. Excellent bond formation of the copper by grain growth through the interface of the two deposits, which were brought into contact during the bonding step, was obtained employing metastable copper. This particular microstructure was designed to exhibit filling capabilities, high purity, small grains after deposition that allow for further growth, and eventually large grains after typical thermal budgets of copper-to-copper bond formations. Initial strategies were proposed to extent the persistence of the metastable microstructure. Such extension was required for compatibility to the complex hybrid bonding process flow and to be able to perform all process steps after electrolytic copper deposition until the final copper-to-copper bond formation. In this work, strategies will be provided to further improve uniformity and lifetime of the metastable microstructure. In addition, different production sequences will be discussed to allow for more flexibility and prolonged holding times during wafer-to-wafer and die-to-wafer production processes.