中国人民解放军八一电影制片厂是中国唯一的军队电影制片厂,位于北京市丰台区六里桥北里, 占地面积392.1亩。1951年3月,以总政治部军事教育电影制片厂名义开始筹建,1952年8月1日正式建厂,命名为解放军电影制片厂,1956年更名为中国人民解放军八一电影制片厂。 2018年2月2日,八一电影制片厂将与原总政歌舞团、总政歌剧团、总政话剧团、总政军乐团合并为解放军文化艺术中心,八一电影制片厂对内更名为“解放军文化艺术中心电影电视制作部”,并由副军编制单位降为正师编制。 6月18日,改革后的八一电影制片厂新任厂长柳建伟称八一电影制片厂的厂标会继续在电影中出现。
Transfer learning (TL) is an important method to accurately identify the bearing health status in cross-domain and ensure the safe operation of machinery. With the advancement in research, it will become a trend to choose different neural networks or optimization functions to improve and re-model fault diagnosis methods. However, the variants of these fault diagnostic methods are less capable of generalizing input dimensions and do not significantly increase demand for machinery expertise. The idea of ensemble learning solves the problem of low generalization. In this research, a parallel ensemble optimization loss function and multi-source TL based model are proposed to solve the problem of unknown distribution difference between source domain and target domain, thus improving the generalization of optimization objectives. Firstly, based on the signal demodulation method, an adaptive input module is constructed to automatically select the input length from the original vibration signal. Secondly, a TL network with low-dimensional features reuse is constructed to achieve weight and bias sharing. Thirdly, a parallel ensemble optimization loss function is developed to align the data whose distribution is unknown between source and target domains. Finally, two cases with multi-source, unsupervised, and cross-domain TL are used to verify the performance of the proposed method. The average accuracy in case 1 and case 2 is 99.81 % and 99.17 % respectively. It is proved that the proposed method can not only get rid of the limitation of manual input length setting, but also overcome the limitation of optimization function, which is more effective than the existing intelligent fault diagnosis models.
Since the cyclostationarity in vibration signals is the key to judge the rotating machine health state, spectral harmonics-to-interference ratio (SHIR) has been used to construct single node feature learning network (SHIR-based blind deconvolution, BD-SHIR) to realize condition monitoring of machine. However, BD-SHIR still has several obvious limitations, including the need for prior fault information and the tendency to fall into local optimal solutions which will affect its feature learning and state monitoring performance. Therefore, this paper proposes a multi-node feature learning network based on BDSHIR, which does not rely on prior information, multi-node adaptive BDSHIR (MABD-SHIR). It uses each filter in the 1/3 binary tree filter bank to design each initial node (filter) in the learning network correspondingly, and introduces an adaptive fault characteristic frequency (FCF) detection process. Since this initialization can give some filters close to the fault resonant band, iterations starting from these nodes are more likely to detect the precise FCF and converge to the optimal solution. Finally, MABD-SHIR can obtain multiple local optimal solutions, among which the one with the largest SHIR is generally closer to the global optimal solution than the one obtained by BD-SHIR. Simulation and experimental data of defective rotating machinery verify the effectiveness of MABD-SHIR in machinery condition monitoring and fault feature learning. Note to Practitioners-This paper is motivated by the problems that the rotating machine condition monitoring based on BDSHIR is easy to prematurely fall into local optimal solution and requires prior fault information. These problems can be effectively solved by extending BDSHIR from single node structure to multi-node structure and introducing adaptive period detection technique (A-DPT). The core idea is to start iterations from multiple initial filters and to detect the FCF adaptively during each iteration. Multiple features conforming to filtered signals' SHIR maximization can be finally learned. Therefore, in this paper, MABD-SHIR is proposed, which is equivalent to a multi-node feature learning network. Since the objective function of BD is usually non-convex, MABD-SHIR can obtain multiple local optimal solutions without requiring prior FCFs. This is more likely to achieve a global optimal solution than BDSHIR, which starts iteration from only one initial filter and ends up with one local optimal solution. In addition, the objective function of MABD-SHIR has lower mathematical complexity, which reduces the difficulty of optimization.
In recent years, great progress has been made in intelligent bearing fault diagnosis based on transfer learning (TL). However, the huge number of parameters is ignored when using large convolutional neural network (CNN), and the input length of different bearings are almost not take into account. The high-energy hardware economic cost and time consumption caused by slow operation of large CNN have brought great difficulties to the engineering practice. Therefore, inspired by envelope demodulation and lightweight network signal processing methods, a novel lightweight TL network is proposed, which can adaptively select the input length (IL) and accurately identify the bearing health states under different work conditions. Firstly, an innovative adaptive IL selection strategy considering bearing differences is proposed to replace manually fixed IL. Secondly, a TL network containing group convolution and instance normalization is constructed to make the network lightweight and operate faster. Thirdly, maximum mean discrepancy is introduced to align the feature distribution between source domain and target domain. Lastly, 81 tasks are carried out on the across-domain datasets to validate the practicability of the proposed method. The results between accuracy and lightweight demonstrate that the proposed method is superior to other four state-of-the-art TL CNN, including three TL CNN and a lightweight model, under identical conditions.
Bearing condition is crucial to train operation safety. In order to accurately locate the resonant zone caused by bearing failure, a compound fault resonant band detection method is proposed. Firstly, a multi-level frequency band segmentation method based on L2/L1 norm of envelope spectrum is designed. Secondly, based on the results of frequency band segmentations, ICS2, a health index that can accurately characterize the cyclostationarity of repetitive transients, is introduced to guide the detection of fault resonant band. By using different multiples of rotation frequency as window length, the proposed method adaptively realizes multi-level band segmentation to extract the subband with the largest ICS2. Moreover, the proposed method has the capability of multiple fault diagnosis. Simulation signals and bench signals verify the effectiveness of the proposed method.
Decomposition techniques generally have two limitations. First, for adaptive correlated kurtogram and variational mode decomposition, etc., the definition of the decomposition target has no direct relationship with the features of fault impacts, i.e., the decomposition is not guided by health indices used to characterize bearing faults, resulting in fault impacts cannot be completely separated from vibration. Second, it is hard to accurately determine the decomposition stop parameter (the number of final output modes), resulting in over- or under-decomposition. These are not conducive to bearing fault detection in engineering practice. Therefore, a new decomposition, multi-objective sparse maximum mode decomposition (MOSMMD), is proposed. Firstly, by analyzing the Fourier spectrum of vibration, MOSMMD constructs multiple finite impulse response filters covering different frequency bands to obtain initial candidate modes. Then, aiming at maximizing L2/L1 norm of envelope spectrum (ES), the upper and lower cutoff frequencies of each filter are adjusted adaptively through iterative optimization, and the frequency bands covered by each mode are adjusted accordingly. Finally, by using that fault feature harmonics have periodic natures in ES, the redundant modes are eliminated and only the modes with obvious fault features are output. The decomposition target of MOSMMD is directly related to fault features, i.e., cyclostationarity, which makes the extraction of fault impacts more accurate. The number of final output modes of MOSMMD is determined adaptively and does not need to be set as input before application. Even when processing concurrent fault signals, MOSMMD can decompose fault modes from vibration without prior fault information.