The aviation industry significantly contributes to global climate change through both CO2 and non-CO2 effects. This study introduces a probabilistic framework that integrates flight mission, engine performance, emission, and simplified climate response models to quantify aviation’s climate impact while accounting for uncertainties in emission and climate model parameters. In particular, uncertainties in emission indices and the contrail forcing factor are updated. Using Monte Carlo simulations, the framework provides probabilistic predictions of key climate metrics, offering insights into the sensitivity of predicted climate impacts to modeling uncertainties. A case study of a representative flight mission illustrates the framework’s application and highlights the contributions of CO2, NOx, and contrails to mission-level climate forcing, revealing that uncertainties in non-CO2 effects, particularly NOx emissions and contrails, dominate the total uncertainty. The findings emphasize the need for improved modeling of non-CO2 effects and demonstrate the framework’s utility in evaluating current and future propulsion systems. By advancing uncertainty quantification in aviation climate impact assessments, this study provides a robust tool to inform sustainable aviation technologies, flight optimization strategies, and evidence-based policymaking.
Computationally efficient and sufficiently accurate mass estimation methods are required for the design exploration of aircraft with nonconventional configurations at the conceptual design stage. This paper investigates a box-wing regional aircraft developed within the LuFo project DOXWING, characterized by high-aspect-ratio wings and small stagger, for which traditional semi-empirical equations are insufficient to accurately estimate the wing mass due to the high aspect ratio and closed-wing configuration. To successfully perform the sizing of the box-wing configuration while accounting for aeroelastic effects, an aero-structural analysis framework was used and refined by taking all six sectional force and moment resultants into account in the sizing methodology, and using a more comprehensive definition of load cases based on the top-level aircraft requirements to ensure a wider coverage of the flight envelope. Following the framework’s validation through a comparison of its analysis results with corresponding reference values for both conventional and unconventional aircraft configurations, a parametric study was carried out for the DOXWING aircraft, which is comparable in size to the ATR72-class aircraft, by varying the wingspan, wing area, and wing loading. A better understanding of how these design parameters affect the wing mass and aerodynamic performance will enable more meaningful analyses in the subsequent conceptual aircraft design processes. Finally, a weight-estimation-relationship (WER) equation for wing-mass estimation is derived from the results of the parametric study, while a surrogate model is introduced to further enhance the prediction accuracy in regions where the nonlinear interactions between design variables cannot be fully represented by the WER equation. The proposed framework achieves a mean absolute percentage error (MAPE) of 2.71% against reference wing masses from the literature, while the derived WER equation approximates sizing results for the DOXWING aircraft with 0.98% MAPE, supporting rapid conceptual design studies and showing that wing mass increases progressively with aspect ratio at fixed wing area and wing loading within the investigated design space.
The travel behavior of individuals is significantly influenced by the built environment and travel facilities, impacting trip frequency, destination, and duration. This study aims to explore how these effects vary across different socioeconomic groups, particularly considering gender differences, and how individuals engage with state-of-the-art transport modes such as shared vehicles and bicycles during various stages of their life cycle. Using data from the 2018 Madrid (Spain) Travel Survey, we analyze the differential responsiveness to changes in trip frequency across different traffic zones. Notably, the inner ring provides access to shared vehicles and bicycles. We construct four multinomial logit models for distinct origin-destination trip types (inner-inner, innerouter, outer-inner, outer-outer). Our findings reveal common factors influencing the decision to initiate new trips, including age group, mode choice, trip reason, occupation, and importantly, gender. A policy analysis indicates that individuals residing in the inner ring exhibit a heightened sensitivity to their life cycle, particularly in the context of gender, impacting their decision-making regarding new trips.
When assessing new technologies at the overall aircraft level, it is crucial to establish an appropriate benchmark to evaluate the resulting performance of the final concept aircraft. This publication defines a short-to medium-range baseline aircraft for entry into service in 2035, which serves as a benchmark for the HOPE project. This aircraft is sized using the Bauhaus Luftfahrt Aircraft Design Environment (BLADE), and its engine model is derived using the in-house tool Aircraft Propulsion System Simulation (APSS). The top-level aircraft requirements and technology assumptions for the entire project timeline are also defined and used for the baseline aircraft. Compared to a state-of-the-art aircraft (entry into service in 2015), the baseline aircraft consumes 21.4% less block fuel during the design mission and 20.9% less block fuel during the typical mission, since its operating empty mass is reduced by 13.6%, its aerodynamic performance is improved by 8.5%, and it has 6.4% more efficient engines.
The aviation industry has committed to achieve the net-zero emissions for 2050 by implementing a combination of innovative technologies, including alternative fuels (e.g. hydrogen and Sustainable Aviation Fuels (SAF)), electrification and operational efficiencies. Within this framework, under the coordination of AIRBUS, three European Universities (LEPMI/GRENOBLE-INP, Leibniz University Hannover, and Technische Universiteit Delft) and two research institutions (Bauhaus Luftfahrt e.V. and the German Aerospace Centre) are collaborating by combining their efforts on the EU-funded project HYdrogen eLectrical Engine Novel Architecture (HYLENA). The project aims to study, develop and optimize an innovative propulsion system design where a Solid Oxide Fuel Cell (SOFC) is integrated into an aero-gas turbine to efficiently co-generate power and valorise its high temperature heat (600-1000 °C). The system is further combined with an electric motor, resulting in a highly efficient hybrid-electric (η th ≈ 60-70 %) aircraft propulsion concept for extended range regional aircraft. [1, 2] This application requires SOFC stacks to achieve both enhanced gravimetric power density and extended durability, while reducing the integration complexity and maintaining a lightweight system. Hence, to achieve these targets in aeronautical conditions, at a cell level, technological advancements are needed to enhance the cell performance and longevity, with critical components including anode, electrolyte, cathode and support materials. On the other hand, the evaluation of current collectors, interconnects and sealants are also pivotal, along with novel stacking strategies that will allow an optimized integration within the aircraft system, while enhancing gravimetric and volumetric power densities at system level. This work aims to provide a comprehensive evaluation of the key technological progresses and improvement potential of SOFC in aeronautical conditions. Alongside, the status and the challenges of the advancements will be analysed to assess their applicability in the context of the HYLENA project. This includes advances in the different SOFC geometries (planar, (micro)-tubular and monolithic SOFCs), along with their materials, manufacturing developments and respective analysis of their gravimetric power density and (thermo)-mechanical stability under high-pressure conditions. [1] D. Kierbel et al. Aircraft Electrical Propulsion System Powered by Solid Oxide Fuel Cell Thermodynamically Integrated into Gas Turbine. TSAS, 2025. [2] P. Nehter et al. Solid Oxide Fuel Cells for Aviation, ECS Trans, 2023. 111 143