The nitrogen removal efficiency of the membrane aerated biofilm reactor (MABR) was mainly limited by the difficulty of regulating the internal microenvironment of the biofilm. To solve this issue, conductive carbon fiber was woven on the surface of non-conductive hollow fiber membrane (aeration membrane) to construct a composite electrode, which was used as the cathode of microbial fuel cell (MFC). This structure forms conductive areas and non-conductive areas alternately distributed along the axial direction on the surface of hollow fiber membrane(i.e. anaerobic zones and aerobic zones were alternately arranged.). This study systematically examined the effects of O2 concentration under different substrates (NO3--N/NH4+-N). The TN removal rates reached 93.62 f 1.56 % with NH4+-N as substrate at the O2 of 0.3 f 0.03 mg/L without additional carbon source in cathode. 16S rRNA gene and Metagenomic sequencing showed that ammonia-oxidizing bacteria (Nitrospira:19.45 % and Nitrosomonas: 15.71 %) were dominant in the aeration membrane. Anaerobic ammonium oxidation (Candidatus Brocadia: 16.98 %) was the main denitrification, and denitrifying bacteria (Denitratisoma: 10.32 % and Truepera: 8.98 %) were dominant in the carbon fiber. The regional separation of ammoxidation and anammox was realized at the micro level, while the two processes showed significant synergy at the macro level. This novel composite structure not only resolved the adverse effect of O2 on denitrification, but also provided a new strategy for the zonal regulation of biofilms in MABR.
The continually increasing global sewage sludge production has created major environmental and economic problems, requiring innovative management strategies. Converting sludge into sludge-based adsorbents (SBAs) has emerged as a promising pathway for waste valorization and pollutant removal, but a comprehensive analysis of its entire lifecycle application is still insufficient in the existing literature. This study systematically summarized the application of SBAs in the removal of various pollutants (heavy metals, organic contaminants, nitrogen, and phosphorus) by combining potential adsorption mechanisms. The feasibility of recovery technology and the management of exhausted adsorbents were well elucidated and discussed. The issues that SBAs may bring to humans and environments during their use were analyzed, and it was pointed out that pyrolysis is a promising technology to stabilize heavy metals and reduce the secondary pollution of SBAs to the environment. In addition, it proposed the potential application of SBAs for reuse in other fields and the future perspectives. Overall, this review provides valuable insights and clear directions for future research through in-depth analysis of advanced technologies, aiming to promote sustainable, economically feasible, and practically applicable development within the framework of the circular economy.
Wastewater treatment plants (WWTPs) are major contributors to global anthropogenic greenhouse gas (GHG) emissions, with China ranks among the leading emitters. In the context of China's "dual-carbon" journey, precision quantification and predictive forecasting of GHG fluxes, particularly methane (CH4) and nitrous oxide (N2O)—are crucial for developing advanced mitigation strategies of WWTPs. To accurately assess GHG emissions, this study firstly introduced customized emission factors (EFs) to precisely evaluate the GHG emissions of a full - scale A2O - based WWTP in Beijing. This approach addressed the overestimation of emissions when using the IPCC's standard EFs. Additionally, the study proposed machine learning (ML) techniques to predict GHG fluxes based on routine wastewater quality parameters. Specifically, Long Short-Term Memory (LSTM) and Random Forest (RF) models showed the strong performance in predicting CH4 and N2O emissions, respectively. Moreover, our findings revealed distinct spatiotemporal patterns of GHG emission: CH4 emissions peak during the summer solstice, while N2O emissions rise during the winter months. For the first time, this study identified the nitrification biofilter in the advanced treatment unit as a significant direct source of N2O emissions. Eventhough, indirect CO2 emissions account for a dominant 57%-90% of the total GHG emissions. Scenario analyses revealed a strategic mitigation approach. Energy conservation emerged as the most effective measure, capable of reducing emissions by 23.41%, followed by heat recovery, which could cut emissions by 10.15%. In practical applications, improving energy efficiency is of utmost importance in real - world mitigation strategies. This highlights the significance of integrated approaches for achieving the sustainable development of WWTPs in the "dual - carbon" background.
Environmental challenges of antibiotics contamination have emerged to address severe impacts on ecological stability and human health. Active sampling methods are not well-fitted to study the emerging pollutants since complicated and unstable enrichment devices/chemicals are significantly required for measurements. Diffusive gradients in thin-films (DGT) are proved to be useful for organic compound detection, but limited by its non-specificity for quinolones (QNs) and tetracyclines (TCs) in waters. Consequently, a metal-organic framework derived carbon specific to QNs and TCs was used as binding agent to develop selective DGT (qt-DGT) in this study. qt-DGT had highly selective adsorption capacity for QNs at 85.45-112.59 μg and TCs at 79.19-85.92 μg in a pH range of 4-9 and ionic strength from 0.001 to 0.05 M. Masses of antibiotics accumulated by qt-DGT increased linearly with time in 24 h. After the deployment in a wastewater treatment plant (WWTP) of Beijing, the qt-DGT exhibited stable and selective uptake of QNs and TCs in comparison with traditional HLB-DGT and active sampling methods. With qt-DGT measurements, QNs and TCs up to 1202.3 ng/L from influent forced WWTP became the major sink of antibiotics, and 830.1-966.3 ng/L from effluent warned the inefficient treatment leading to elevated threats on natural waters.
The land application of sewage sludge is a cost-effective disposal method, particularly in ecological projects where high sewage sludge addition can function as soil substitute and improve soil quality. This study aims to evaluate the feasibility of using sewage sludge as a substrate for slope ecological restoration and to identify the key factors that limit its application at higher doses. A 150-day pot experiment using tall fescue (Festuca arundinacea) evaluated substrate characteristics, including water-soluble salts and heavy metals activities, as well as plant growth, physiological responses, and enrichment of the fifteen elements at three addition ratios (10 %, 30 %, and 50 %, w/w). The results revealed that increasing sludge addition led to higher levels of water-soluble salts and heavy metal activities in the substrate. During the seedling stage, heavy metals and salts accumulate in the root system, inhibiting plant growth. However, as the plant matured, heavy metal and salt concentrations decreased, resistance improved, and normal growth resumed. Analysis using Random Forest and Structural Equation Modeling suggested that the primary driver of early growth inhibition was salt stress rather than heavy metal toxicity. From an application and contamination risk assessment perspective, sewage sludge application rates exceeding 30 % (w/w) should be avoided unless pre-treated.