Bipin Tripathi Kumaon Institute of Technology, formerly Kumaon Engineering College (KEC), is an autonomous engineering and technology institute in the Almora district in state of Uttarakhand, India. The institute is located in the city of Dwarahat. It is financed by the government of Uttarakhand and managed by the Board of Governors with the Minister of Technical Education Government of Uttarakhand as the Chairman and Secretary of Technical Education as Vice-Chairman. Originally affiliated to Uttarakhand Technical University, it is now a completely autonomous institute..
In this paper, we examine the optimal performance of silver (Ag), perovskite (MAPBr3) materials, and Hafnium Diselenide (HfSe2) layer-based surface plasmon resonance (SPR) sensors for detecting refractive indices (RI) between 1.33 and 1.335. The best sensitivity of 426.73 degrees/RIU is attained with layer thicknesses of 46 nm, 3 nm, and 1 nm for Ag, MAPBr3, and HfSe2, respectively. A comparative study produced superior results, with sensitivity values provided by several prisms, including CaF2-based SPR sensors, attaining maximal sensitivity. The suggested structure can also be a biosensor for SARS-CoV-2 virus diagnosis, as its RI values fall within the designated range. For SARS-CoV-2, a maximal sensitivity of 496.86 degrees/RIU is attained with a figure of merit (FoM) of 169.6 RIU-1. Additionally, we have discussed the machine learning (ML) optimization results for various performance parameters and demonstrated its ability to accurately predict sensor behavior. The effectiveness of the model was confirmed in this respect by means of thorough heat map and scatter plot analyses. A sensor based on Ag, MAPBr3, HfSe2, and sensing medium (SM) is theoretically proposed for medical diagnostics, particularly for the SARS-CoV-2 virus, to enhance sensitivity and improve performance. Also, the integration of machine learning in this study demonstrates excellent results.
Background: Accurate and dependable brain tumor classification from magnetic resonance imaging (MRI) is essential for clinical decision support, yet remains challenging due to inter-dataset variability, heterogeneous tumor appearances, and limited generalization of many deep learning models. Existing studies often rely on single-dataset evaluation, insufficient statistical validation, or lack interpretability, which restricts their clinical reliability and real-world deployment. Methods: This study proposes a robust brain tumor classification framework based on the ConvNeXt Base architecture. The model is evaluated across three independent MRI datasets comprising four classes-glioma, meningioma, pituitary tumor, and no tumor. Performance is assessed using class-wise and aggregate metrics, including accuracy, precision, recall, F1-score, AUC, and Cohen's Kappa. The experimental analysis is complemented by ablation studies, computational efficiency evaluation, and rigorous statistical validation using Friedman's aligned ranks test, Holm and Wilcoxon post hoc tests, Kendall's W, critical difference diagrams, and TOPSIS-based multi-criteria ranking. Model interpretability is examined using Grad-CAM++ and Gradient SHAP. Results: ConvNeXt Base consistently achieves near-perfect classification performance across all datasets, with accuracies exceeding 99.6% and AUC values approaching 1.0, while maintaining balanced class-wise behavior. Statistical analyses confirm that the observed performance gains over competing architectures are significant and reproducible. Efficiency results demonstrate favorable inference speed and resource usage, and explainability analyses show that predictions are driven by tumor-relevant regions. Conclusions: The results demonstrate that ConvNeXt Base provides a reliable, generalizable, and explainable solution for MRI-based brain tumor classification. Its strong diagnostic accuracy, statistical robustness, and computational efficiency support its suitability for integration into real-world clinical and diagnostic workflows.
The increasing need for decentralized and sustainable energy sources has fueled interest in biochar, a high-carbon-content material obtained from biomass pyrolysis or gasification, as a viable option for bioelectricity production. Considering its tunable porosity, high carbon content, and natural electrical conductivity, biochar presents an unprecedented platform for transforming biomass waste into useful energy. Biochar to bioelectricity conversion contributes not only to renewable energy targets but also to carbon sequestration and waste valorization. The review presents a bibliometric analysis of biochar to bioelectricity, as well as its applications. The study systematically examines biochar conversion technologies such as pyrolysis, gasification, torrefaction, and their applications in electrical energy systems. Further, it discusses a performance-enhancing modification, techno-economic evaluation, technology readiness level (TRL), future perspectives, and challenges. The present study emphasizes the revolutionary contribution of biochar to a sustainable energy future through the rapid implementation of biochar-driven energy solutions, which significantly support sustainable development goals (SDGs) 7 and 13.
In this work, a D-shaped Photonic Crystal Fiber (PCF) sensor with a detection range of 1.30–1.35 is proposed, including Gold (Au), Titanium Dioxide (TiO2), graphene, and a functionalized sensing region. Instead of filling or coating inside the PCF’s air holes, the Gold (Au) layer is applied to the polished surface. The effects of the larger air holes’ diameter and the thickness of the Au layer are examined. To achieve effective RI sensing, the proposed design leverages the strong coupling between the core mode and the Surface Plasmon (SP) excitation mode. Modal dispersion, confinement loss, and electric field distributions are analyzed for analyte RI values ranging from 1.30 to 1.35 using the Finite Element Method (FEM). The sensor demonstrates improved plasmonic excitation with a maximum Wavelength Sensitivity (WS) of 3000 nm/RIU (Au = 45 nm), strong confinement loss of more than 788.39 dB/cm (at Au = 40 nm), and a highest Figure of Merit (FoM) of 62.5/RIU (at Au = 40 nm with RI = 1.32). The TiO2 layer enhances mode coupling and resonance sharpness, while the optimized Au thickness boosts sensitivity and spectral resolution. Additionally, the blood components reach the WS of 5000 nm/RIU for plasma and 3000 nm/RIU for Krypton. Because of its high tunability and repeatable performance, the PCF–SPR biosensor is a promising choice for precise biochemical and biomedical sensing applications.
This work presents an analysis of long-range surface plasmon resonance (LRSPR) sensor with a high-figure of merit (FoM) and imaging sensitivity (Simag) for the detection of Cu2+ and Mg2+ ions in aqueous medium that is based on a Cytop-Cu (Copper)–ZrN (Zirconium Nitride) structure. Optimizing of resonance properties and improving sensing performance was obtained by analyzing the impact of Cytop and Cu layer thicknesses on the reflectance curve. To investigate the distribution of electric fields, plasmonic confinement, and resonance behavior at various thicknesses, numerical simulations utilizing Maxwell’s equations and fine mesh analysis were performed. The findings show that, in noble materials, the addition of ZrN as a plasmonic layer significantly enhances field confinement at the metal–dielectric interface while lowering optical losses. The maximum FoM of 1818.41/RIU and Simag of 5844.3/RIU at Cytop 900 nm and Cu 20 nm thicknesses. The maximum detection accuracy (DA) 100/° is achieved for the detection of both ions Cu2+ and Mg2+. The synergy between Cu and the ultrathin ZrN interfacial layer, along with the inherent stability advantages of ZrN over conventional plasmonic metals like Ag and Al, are liable for the performance improvement seen in the suggested sensor. While the addition of an ultrathin ZrN layer successfully alters the interfacial optical properties, resulting in better mode confinement, decreased optical damping, and increased symmetry of the LRSPR mode, Cu offers a strong plasmonic response in the visible region. Additionally, the penetration depth (PD) of 496.05 nm is obtained at 0 mol/kg concentration of Cu2+ and Mg2+ions. Overall, the proposed Cytop-Cu–ZrN-based LRSPR structure shows enhanced stability, DA and FoM, and field enhancement, making it a promising platform for chemical sensing and ion detection applications.