The Global Biodiversity Information Facility (GBIF) is an international organisation that focuses on making scientific data on biodiversity available via the Internet using web services. The data are provided by many institutions from around the world; GBIF's information architecture makes these data accessible and searchable through a single portal. Data available through the GBIF portal are primarily distribution data on plants, animals, fungi, and microbes for the world, and scientific names data.The mission of the GBIF is to facilitate free and open access to biodiversity data worldwide to underpin sustainable development. Priorities, with an emphasis on promoting participation and working through partners, include mobilising biodiversity data, developing protocols and standards to ensure scientific integrity and interoperability, building an informatics architecture to allow the interlinking of diverse data types from disparate sources, promoting capacity building and catalysing development of analytical tools for improved decision-making.GBIF strives to form informatics linkages among digital data resources from across the spectrum of biological organisation, from genes to ecosystems, and to connect these to issues important to science, society and sustainability by using georeferencing and GIS tools. It works in partnership with other international organisations such as the Catalogue of Life partnership, Biodiversity Information Standards, the Consortium for the Barcode of Life (CBOL), the Encyclopedia of Life (EOL), and GEOSS. The biodiversity data available through the GBIF has increased by more than 1,150% in the past decade, partially due to the participation of citizen scientists.From 2002 to 2014, GBIF awarded a prestigious annual global award in the area of biodiversity informatics, the Ebbe Nielsen Prize, valued at €30,000. As of 2018[update], the GBIF Secretariat presents two annual prizes: the GBIF Ebbe Nielsen Challenge and the Young Researchers Award..
Our goal is to enhance understanding of phylogenetic endemism (PE), which is studied using a range-weighted phylogenetic tree. We present a new method called Range Weighted Branch Length Difference (RWiBaLD), which is based on the difference between the length of a branch on a range-weighted observed tree and its length on the corresponding range-weighted comparison tree. The latter is a tree with the same topology as the observed tree but with branches adjusted to be of equal length before range-weighting. The goal of this method is to detect the branches of the phylogeny that contribute most to PE, and to distinguish among neo-endemism, paleo-endemism, and a novel category: meso-endemism. The latter is a heretofore missing category in the study of endemism referring to a highly range-restricted lineage that is not particularly short (neo-) or long (paleo-). Application of this approach is illustrated using the plant genus Acacia across the continent of Australia, using previously published spatial data and phylogeny. We show the properties of RWiBaLD, and how to apply it by: (1) mapping the outputs on a phylogeny, thus for the first time enabling PE to be scored for use in existing phylogenetic comparative methods, and (2) dissecting the composition of concentrations of PE on the landscape that are detected by the Categorical Analysis of Neo- And Paleo-Endemism (CANAPE) method. Whereas CANAPE identifies geographic concentrations of high PE, and gives a summary classification of the type of endemism dominating in a location, RWiBaLD identifies the specific branches that contribute the most to PE, and what type of endemism they represent. Thus, RWiBaLD enables novel studies of the evolutionary and ecological causes of endemism, as well as improved conservation assessment.
Biodiversity data linkage is a prerequisite for addressing pressing societal and research questions. Digitisation of resources has progressed rapidly, but this has led to a number of parallel approaches for datasets and services, making it difficult for users to identify the appropriate tool for their requirements. While scientific names are a key element for data linkage, they are not fully suited to this role. Many of them are not unique identifiers for taxa (such as the species that form the basic building block of a large part of biodiversity information) because taxonomic research has resulted in name changes. Likewise, usage is prone to errors like misspellings or misapplication of nomenclatural rules. This complexity and unreliability may demotivate data providers from readying their valuable datasets for integration into an interlinked landscape of biodiversity information. Correct linking of scientific names is an important element in this process of linking data from various sources. Aggregated taxonomic datasets and name-matching services are an essential infrastructure to build tools for this purpose and are increasingly using unique, resolvable and persistent name identifiers. Accessing the aggregated dataset via these identifiers can also display connections between the names within the dataset, linking, orthographic variants to correct spelling, synonyms to accepted taxon name etc. External datasets that hold valuable research and usage information as taxon-associated data can also be linked directly via these identifiers. This helps them to meet the FAIR data criteria (Findable, Accessible, Interoperable, Reusable). Name matching finds the aggregator's name identifier, adding this identifier to the local data record may help to further interconnect biodiversity information, if data providers are motivated to partake in this process of enabling data linkage. We posit that this motivation can be increased by simplifying the process of choosing the right method for their specific needs, which may vary widely. We thus propose a framework that helps users to select the optimal workflow to address these needs. This involves: (i) identifying and categorising the specific criteria that characterise different user needs; (ii) based on these criteria, defining the necessary metadata both for taxonomic datasets accessed by name-matching services and the name-matching services themselves; (iii) providing tools based on these metadata that will allow users to interactively and confidently choose the best-fit target dataset and name matching service for their specific purpose.
ABSTRACT The condition of ancient marine ecosystems provides context for contemporary biodiversity changes in human‐impacted oceans. Sequencing sedimentary ancient DNA (sedaDNA) is an emerging method for generating high‐resolution biodiversity time‐series data, offering insights into past ecosystems. However, few studies directly compare the two predominant sedaDNA sequencing approaches: metabarcoding and shotgun‐metagenomics, and it remains unclear if these methodological differences affect diversity metrics. We compared these methods using sedaDNA from an archived marine sediment record sampled in the Skagerrak, North Sea, spanning almost 8000 years. We performed metabarcoding of a eukaryotic 18S rRNA region (V9) and sequenced 153–229 million metagenomic reads per sample. Our results show limited overlap between metabarcoding and metagenomics, with only three metazoan genera detected by both methods. For overlapping taxa, metabarcoding detections became inconsistent for samples older than 2000 years, while metagenomics detected taxa throughout the time series. We observed divergent patterns of alpha diversity, with metagenomics indicating decreased richness towards the present and metabarcoding showing an increase. However, beta diversity patterns were similar between methods, with discrepancies only in metazoan data comparisons. Our findings demonstrate that the choice of sequencing method significantly impacts detected biodiversity in an ancient marine sediment record. While we stress that studies with limited variation in DNA degradation among samples may not be strongly affected, researchers should exonerate methodological explanations for observed biodiversity changes in marine sediment cores, particularly when considering alpha diversity, before making ecological interpretations.
The InsectAI COST action will support insect monitoring and conservation at the national and continental scale in order to understand and counteract widespread insect declines. The Action will bring together a critical mass of researchers and stakeholders in image-based insect AI technologies to direct and drive the research agenda, build research capacity across Europe and support innovation and application.There is mounting evidence that populations of insects around the world are in sharp decline. Understanding trends in species and their drivers is key to knowing the size of the challenge, its causes and how to address it. To identify solutions that lead to sustainable biodiversity alongside economic prosperity, insect monitoring should be efficient and provide standardised and frequently updated status indicators to guide conservation actions.The EU Biodiversity Strategy 2030 identifies the critical challenge of delivering standardised information about the state of nature and image-based insect AI can contribute to this. Specifically, the EU Nature Restoration Law will likely set binding targets for the high resolution data that cameras can provide. Thus, outputs of the Action will contribute directly to EU policies implementation, where biodiversity monitoring is considered a key component.The InsectAI COST Action will organise workshops, conferences, short-term scientific missions, hackathons, design-sprints and much more, across four Working Groups. These groups will address how image-based insect AI technologies can best address Societal Needs, support innovation in Image Collection hardware, create standardised approaches for Image Processing and develop novel Data Analysis and Integration methods for turning data into actionable insights.
Vegetation plots (relevés)—records of all plant species with their abundance in fixed-size plots in terrestrial vegetation—might be independent, arranged in nested designs, or established as permanent plots for resurvey. Given their complexity, representing vegetation plot data in global infrastructures such as the Global Biodiversity Information Facility (GBIF) requires thoughtful use of Darwin Core (DwC) and extensions (Darwin Core Task Group 2009). In DwC, a relevé corresponds to a single dwc:Event, hence, the recommended way to publish such data in GBIF is using the Event Core with at least two additional extensions: Occurrence and Relevé (GBIF 2018). The GBIF Relevé extension provides standard measurements across vegetation layers, with explicitly defined units and precision (e.g., “tree cover (%)”). Other plot-level measurements (e.g., soil pH) can be described via the DwC Measurement or Facts extension. The recently ratified Humboldt extension (TDWG Humboldt Extension Task Group 2024) expands the DwC Event class to capture the sampling context of more complex plot designs by extending the descriptions of sampling events, making it especially relevant for nested and repeated sampling. However, recommendations are still evolving (Ingenloff et al. 2025) and it has not been extensively tested with vegetation plot data (Suppl. material 2). Out of the 374 databases listed in the Global Index of Vegetation‐Plot Databases (GIVD; accessed on 15.09.2025), only a few are currently published via GBIF (e.g., Hennekens 2018, Kuzemko et al. 2024, Swacha et al. 2025), and mostly as Occurrence class datasets. As a case study, we present the dataset by Palpurina (2025) exported from Turboveg 2 (Hennekens and Schaminée 2001), the standard software for vegetation data management in Europe. For this dataset, we used an R script*1 to directly access the database and export the data as Darwin Core Archive (DwC-A) using an Event Core with Occurrence, Relevé and Humboldt extensions. Regarding the Humboldt extension, field mapping required one-to-many and many-to-one relationships between Turboveg and DwC. Because some Turboveg 2 fields lacked sufficient detail, the script had to include hardcoded values and manual enrichment steps to populate missing DwC fields and ensure schema compliance. Our talk (Suppl. material 1) addresses challenges in applying the Humboldt extension to vegetation-plot data, focusing on common practices for capturing key data critical for vegetation data interoperability.