.
In powder bed fusion additive manufacturing (PBF-AM), the ability to form dense, uniform thin layers "Spreadability" is a primary determinant of build quality yet remains without a standardized assessment. This study integrates controlled re-coating experiments with discrete element method (DEM) simulations to evaluate the spreadability of plasma-atomized AlSi10Mg powders and to propose quantitative, transferable screening metrics. Five powders with distinct particle size distributions were tested across layer thicknesses from 25 to 100 mu m, recoating speeds from 50 to 200 mm/s, and multiple blade geometries. The measured powder layer density (PLD) spanned 44 to 65 %; thicker layers and moderate speeds increased PLD, and a round blade consistently outperformed flat, inclined, and sharp profiles. Material determinants of spreadability were quantified. Linear correlations were observed between PLD and static packing indices apparent, tapped, and conditioned bulk densities with coefficients of determination in the range 0.80 to 0.95, indicating that powders capable of dense static packing also compact effectively under the re-coater. Cohesion measurements identified an operational window centered near 0.30 to 0.35 kPa; PLD declined at higher cohesion due to agglomeration. Segregation mapping across start, middle, and end regions using D10, D50, and D90 showed size-dependent migration that was modest for narrow and medium distributions and more pronounced for wide and coarse distributions. Elevated relative humidity increased effective cohesion and reduced PLD for fine and medium powders, while wide and coarse powders were comparatively insensitive. DEM resolved three coupled sub-mechanisms; detachment, redistribution, and settling; that rationalize these trends. Based on the combined evidence, preliminary spreadability guidelines are proposed: relative tapped density of approximately 67 % or higher, conditioned bulk density of approximately 62 % or higher, cohesion in the range 0.30 to 0.35 kPa, and particle size distribution span between 0.8 and 1.0. These results provide a framework for assessing and standardizing powder spread-ability in PBF-AM.
Single melt tracks in laser powder bed fusion break into discontinuous beads when capillary and thermocapillary forces overwhelm viscous damping, yet the melt thermophysical properties co-vary in a real alloy and cannot be separated experimentally. This study separates them in a semi-resolved coupled fluid and discrete-particle framework with a Volume-of-Fluid free surface and phase change, compared with published single-track Inconel 718 experiments across the unstable, metastable and stable regimes. Track stability is quantified by a bounded index, the covered fraction of scan length times a width-uniformity factor, which saturates once a track is continuous and uniform and, given a common analysis window, applies to solver output and micrographs alike. It reproduces the rise and plateau of the experimental index with laser power. Judged against the scatter between independently packed powder beds, surface tension, its temperature derivative and heat capacity change track stability, whereas viscosity and thermal conductivity have no resolvable effect. Per unit relative change, surface tension is the most influential property at every power, consistent with the low Weber and Ohnesorge numbers of a capillary-controlled melt. The ranking indicates which property uncertainties most limit predictive melt-pool models.
Evacuating the powder trapped inside the complex cavities of Triply Periodic Minimal Surface (TPMS) structures remains a major challenge in metal-powder-based additive manufacturing. The Discrete Element Method offers valuable insights into this evacuation process, enabling the design of effective de-powdering strategies. In this study, we simulate gravity-driven evacuation of trapped powders from inside unit cells of various TPMS structures. We systematically investigate the role of cohesive energy density in shaping the retention profile. Overall, we conclude that the Schwarz-P and Gyroid topologies enable the most efficient powder evacuation, remaining resilient to cohesion-induced flow hindrance. As the cohesion energy density is increased from 0 to 35kJ/m3, the two geometries transition from trapping almost negligible powder to 4.10% and 22.2% respectively. However, our results reveal that powders beyond a cohesive energy density of 35kJ/m3 should be strictly avoided due to catastrophic retention across all TPMS structures. Furthermore, for the two unit cells, we analyse detailed kinematics and interpret the results in relation to particle overlaps and contact force distributions, finding that the Schwarz-P is uniquely hindered by transient arching. This insight is valuable for devising cost-optimized, energy-efficient protocols for de-powdering.
Fluid-structure interaction becomes substantially more complex when the solid can fracture: failure alters the geometry exposed to fluid loading, while the modified flow redistributes the forces driving further damage. Multi-leaflet systems such as biological and artificial valves are a canonical setting for studying this fluid-breakable-structure interaction, since damage, perforation, or detachment progressively degrades their flow-control function. Breakable bicuspid leaflets are simulated with a strongly coupled bond-based peridynamics-immersed boundary-cascaded lattice Boltzmann framework, varying the Young's modulus E and critical stretch ratio s(c) to quantify how fragility alters leaflet motion, flow features, and function. When damage is allowed, behavior falls into four outcomes: normal operation, partial failure, failure during opening, and failure during closure, with the most common mode being failure during closure where near-wall fracture initiates on the outlet side and leads to detachment from the wall. For s(c)greater than or similar to 0.35, normal operation is recovered and leaflet displacement in the flow direction remains consistent, although damage can still reduce leaflet range of motion and alter the flow. Low E and s(c) cause failure during opening under slight deformation, and partial failure yields asymmetric dynamics with a vortex behind the remaining leaflet and a reverse jet due to loss of sealing. At fixed E, s(c) chiefly sets failure timing; E chiefly sets failure mode and damage severity. However, no sweeping statements link damage levels to E or s(c) and the failure mechanism must be considered before judging the significance of any parameter. These results link specific fracture modes with distinct flow features in a two-dimensional brittle bicuspid leaflet. However, these findings are primarily qualitative and cannot be used directly to predict in vivo behavior or the mechanical response of soft tissue.
The pneumatic tsunami generator enables the generation of Froude-scaled long waves in laboratory flumes through controlled air-pressure variation within a sealed tank. The internal water height responds to pressure evolution above the free surface, which in turn initiates wave formation at the connected flume interface. This configuration represents a canonical pressure-driven free-surface problem in which compressible gas dynamics are coupled to an incompressible liquid through a moving interface within a sealed volume. A reduced-order model for the air-water dynamics is developed in two asymptotic regimes: a quasi-static hydrostatic formulation with incompressible air and a dynamic non-hydrostatic formulation that accounts for air compressibility and water-column inertia. The model incorporates mass conservation, pressure-volume relations, and valve-pump inflow and outflow dynamics to describe the nonlinear response of the tank and the resulting near-field wave signal. Experimental data from a pneumatic tsunami generator system are used to examine the water-height evolution and associated near-field response. Model predictions show strong agreement with experimental observations, validating the underlying physical mechanisms. The model captures key dynamical features, including amplitude modulation, phase lag between air pressure and free-surface motion, and the approach to equilibrium between pump extraction and valve inflow. More broadly, the results clarify the dynamical role of air compressibility in pressure-driven free-surface systems and provide insight into transient compressible-incompressible coupling in sealed fluid configurations. These findings establish a mechanistic foundation for understanding crest- and trough-led long-wave formation and for future integration with full wave-propagation models.