Indira Gandhi Delhi Technical University for Women (IGDTUW), is an all women's university located in New Delhi, India on the heritage campus at Kashmere Gate, Delhi. It was founded as the Indira Gandhi Institute of Technology in 1998. In May 2013 it gained autonomy and became the first women's technical university in India established by Govt. of Delhi. The university offers BBA and BTech, MTech, and PhD programs in four branches of engineering i.e. in the field of Computer Science and Engineering, Electronics and Communication Engineering, Mechanical and Automation Engineering and Information Technology. The university also offers 5 years program in Bachelors of Architecture (B.Arch.) and a 2-year post graduate program in M. Plan (Urban Planning).e.Arch.
Grade 91 steel is widely used in the power plants for high-temperature applications. The tested specimens were fabricated from base metal and welded portions of Grade 91 steel for conducting tensile and creep tests in the temperature range of 575-675 degrees C and the stress range of 60-220 MPa, respectively. Understanding the creep deformation behaviour of Grade 91 steel up to rupture at different applied stresses is essential for ensuring reliable creep life and safe operation of the structural components of the power plants. The rupture times were obtained from 15 h to 5208 h for the samples of BM and WM. The stress dependence of minimum creep rate and rupture time is followed the Norton power law and the stress exponents were found in the range of 4.6-19.3 for the temperature range of 575-675 degrees C. The strain-hardening exponent is also substantially increased at 625 degrees C during tensile behaviour, which presence of MX precipitates. The higher stress exponent resulted at 575 degrees C and 625 degrees C, is mainly due to interaction of dislocations with the precipitates and grain boundaries. Furthermore, threshold stress analysis is performed for the base metal and weld joints to find the operating mechanism of creep. By considering threshold stresses, the true stress exponents are found to be approximately 4.6 and 5.1 within the temperature range of 575-675 degrees C, confirmed as dislocation climb is the rate-controlling mechanism of creep. The minimum creep rate and rupture time data followed Monkman-Grant relationship. The selected samples were taken for characterization using optical microscopy and scanning electron microscopy. The elemental compositions of the precipitates were analyzed using energy dispersive X-ray spectroscopy. This study gives an understanding of the role of microstructure on creep rupture behaviour of Grade 91 steel in the base metal and weld joints.
The Economic Order Quantity model, which is the most widely applied inventory management technique, usually considers constant demand and holding costs. However, for seasonal products, demand varies periodically, and the holding cost changes with inventory levels. The model can be made more complex when the products deteriorate with time. This paper develops an advanced EOQ model for seasonal products, in which demand follows a sinusoidal function, and holding cost varies with inventory levels. Furthermore, the rate of deterioration over time due to spoilage, obsolescence, or any other forms of deterioration of inventory value is taken into consideration within the model. The sinusoidal demand function can reflect the nature of the variations as seasonal patterns that tend to peak in some seasons and diminish during the others. A constant rate of deterioration implies that, over every unit of time, a fixed percentage loss is considered for inventory. The study explores both linear and non-linear functions for holding costs, acknowledging that inventory storage expenses may not always follow a simple linear progression. Specifically, the model includes various non-linear cost structures to reflect the complex nature of real-world storage costs, which may vary based on inventory levels, time, or other external factors. The total cost function is minimized and incorporates ordering, holding, and deterioration costs in order to get the optimal order quantity. It further carries sensitivity analysis in determining the effects of different deterioration rates, seasonal demand amplitudes, and variations in holding costs on the overall inventory costs as well as on the optimal order quantity.
This study investigates the lubricity characteristics of two nanoparticles, namely Graphene and aluminum oxide (Al 2 O 3 ), when used as nano-dispersants in industrial graded gear oil for heavy earth moving machinery (HEMM). Dual step approach was followed to synthesize the Nanolubricants. The stability of the samples was studied by different methods for better comprehension and further evaluation. The thermophysical, physicochemical and surface properties of the nanolubricants were measured following acceptable standards. The tribological characteristics of the samples were also evaluated experimentally. All the nanolubricant samples showed stable colloidal suspension. The addition of Graphene and Al 2 O 3 to gear oil resulted in a 21% and 25% reduction in the frictional force respectively. The metrics for estimating extreme pressure properties were recorded from a four-ball tester. The Graphene based nanolubricants showed a higher improvement in non-seizure load and weld load respectively, over Al 2 O 3 based nanolubricants. Also, Graphene exhibited an increase in seizure pressure ( p oz ) of 34.44%, whereas the same effect with Al 2 O 3 showed 21.70% increment. The mechanics for improved tribological behavior with Graphene involve a load bearing effect whereas Al 2 O 3 exhibits a ball bearing dominance when exposed to extreme pressure conditions. The nanolubricants significantly reduced motor torque and oil temperature when assessed on real-time test rig.
In this present research, austenitic Super 304H steel is regarded as a promising material and commonly utilized in energy sectors, yet it remains essential to extend the lifetime of current coal-fired power plants. The outcomes of evaluating the microstructure and mechanical characteristics of austenitic Super 304H steel after tensile tests conducted at 705 degrees C. Microstructure examination revealed that the tested steel led to the formation of many M23 sigma phase particles at the grain boundaries, while dispersed C6 carbides and singular Cu and MX particles were detected within the grains. At the grain boundaries, precipitates occasionally created an uninterrupted network. The structure of grain boundary precipitates of the second solid phase is influenced by the energy ratio. Here, the entire grain boundary is wetted by the additional solid phase. Consequently, we noticed for the first time both complete and incomplete wetting of grain boundaries within the ferrite matrix of the alloy. For the first time, we observed that the phenomena of grain boundary wetting can significantly affect the mechanical properties of a polycrystal. Consequently, grain boundary wetting can serve to customize the properties of materials. The existence of several secondary phases led to strength properties exceeding the standard, while still preserving the necessary plastic properties. The mechanical properties were assessed through tensile and hardness tests, while the microstructure was analysed using light optical microscopy and scanning electron microscopy.