The paper presents the development of a correlation model for initial tensile elastic modulus for flexible polymers as a function of Shore hardness in OO and A scale based on measurement. Measured polymers are in groups of silicone rubber, nitrile butadiene rubber (NBR), thermoplastic polyurethane (TPU) and silicone. The model is composed of piecewise exponential functions with fixed coefficients chosen to minimize the S2 error norm and absolute value of relative error at the measured data points. Every chosen section of the hardness scale has one exponential function correlating the hardness to tensile elastic modulus with the argument in the form of a polynomial up to the fourth degree. The coefficients for the polynomial arguments were determined by enforcing interpolation conditions in a chosen set of points in the logarithmic scale for the elastic modulus. The correlation model possesses C0 continuity. For each material, five specimens were used for hardness measurements and five for the elastic modulus testing. The correlation model gives a positive value for elastic modulus of 0 for hardness, and a "finite", "reasonable" value of 100 for hardness and is monotonic. Tensile properties were evaluated using true stress and logarithmic (Hencky) strain, with iterative correction of the changing cross-sectional area to account for large strain. The maximum relative error achieved in the correlation model for the OO scale is 13.4%, while for the A scale it is 7%. The developed model provides a practical and rapid method for estimating the initial tensile elastic modulus from non-destructive hardness measurements and is particularly useful in industrial applications and in the development of material models for dental surgery simulations.
This study investigated the effectiveness of basil (Ocimum basilicum L.) extract obtained by hydrodistillation (EO) and lipid extract (LE) obtained via supercritical fluid extraction in preserving the quality of ground fish patties during refrigerated storage. Gilthead sea bream (Sparus aurata) patties were formulated with varying concentrations of EO and LE and evaluated over three days at 4 °C. The chemical composition of the extracts, analyzed by GC-MS, revealed linalool, eucalyptol, and τ-cadinol as dominant bioactive compounds, with EO richer in monoterpenes and LE in sesquiterpenes. Both extracts significantly reduced lipid oxidation (TBARS) and protein oxidation (thiol content), with the strongest antioxidative effect observed in patties containing 0.150 µL/g of LE. Color parameters (L*, a*, b*, ΔE) were moderately influenced, without adverse effects on product appearance. pH and water activity values remained stable across treatments, while total volatile basic nitrogen (TVB-N) levels confirmed delayed spoilage in extract-treated patties. Results highlight the potential of basil extracts, especially LE obtained by SFE, as effective natural antioxidants in fish-based products. These findings support the development of clean-label, health-promoting products tailored to individual needs, and show that ground fish porridge has promise as a viable material for the production of innovative seafood products.
Ticks are obligate hematophagous ectoparasites of public health importance, acting as vectors of numerous pathogens affecting wildlife, domestic animals and humans. Although birds play an important role in tick ecology and dispersal, information on tick infestations of pheasants in Europe remains limited. This study investigated the prevalence, species composition, developmental stage structure and haplotype diversity of ticks infesting pheasants in Croatia using ecological, morphological and molecular approaches. During the hunting seasons, 255 pheasants from continental and Mediterranean regions of Croatia were examined. Ticks were collected from harvested pheasants and road-killed individuals, morphologically identified, and representative specimens were molecularly confirmed. Overall, 213 pheasants were infested, resulting in a prevalence of 83.5%, and a total of 1103 ticks were collected. Six tick species were identified, with Ixodes ricinus dominating the tick community (80.1%). Molecular analyses confirmed the occurrence of several closely related Mediterranean Ixodes species, including Ixodes festai and Ixodes ventalloi. Nymphs predominated (78.2%), highlighting the importance of pheasants as hosts for immature tick stages. Significant geographical differences were observed. Continental localities were dominated by I. ricinus, whereas coastal and island regions showed significantly higher tick species diversity. Mean tick abundance per pheasant was significantly higher in Mediterranean regions. Male pheasants exhibited higher infestation prevalence and intensity than females. The marked regional differences highlight the influence of Croatia’s biogeographical heterogeneity on tick community composition. These findings demonstrate that pheasants serve as important hosts for diverse tick species and likely contribute to the maintenance of local tick populations, thereby providing a valuable baseline for future surveillance of tick-borne pathogens in Croatia.
It has been proposed that the cyclic rising tone in frequency observed in rising tone quasi-periodic (QP) fast magnetosonic waves is due to the cyclic diffusion of the inner energy edge of the source proton shell distribution toward lower energies. Linear theory shows that as the inner edge of the proton shell diffuses inwards the unstable frequency rises leading to a rising tone. We present the first observations of this diffusion of the proton shell distribution for this type of wave event, observed by the HOPE instrument on Van Allen Probes B, where this diffusion is clearly observed in two back-to-back QP wave cycles. Linear instability is performed on the observed proton shell distribution, and the linear growth rate is compared with the observed wave frequency; the linear theory applied to the observed proton shell distributions was qualitatively but not quantitatively consistent with the observed wave frequencies. Nearby Waveform Receiver burst mode measurements showed that the spacing of the emission bands in frequency was very close to the proton cyclotron frequency f cP, suggesting a near source. However, a +/- 2 nT spacecraft induced oscillation at & half; the spacecraft spin period in the background magnetic field magnitude could not allow us to conclude that the emission bands where at integer multiples of f cP, a stronger condition for source proximity.
This paper presents the modeling, characterization, and design of a modular overactuated quadrotor platform with independently actuated rotor arm tilt angles. The proposed configuration extends conventional multirotor configurations by introducing four additional actuator inputs, enabling full thrust vectoring and increased control flexibility. A comprehensive system model is derived and parameterized using a combination of experimental propulsion characterization and CAD-based mechanical parameter estimation. Using the attained model, the system is evaluated under multiple operating conditions in a simulation environment, to demonstrate the expected behavior of the overactuated system. In addition, a modular prototype is designed, manufactured, and assembled, and preliminary testing is done to validate the feasibility of the proposed tiltactuation concept and overall system integration. Future work will focus on experimental validation of full flight capabilities.