Mahindra & Mahindra Limited (M&M) is an Indian multinational automotive manufacturing corporation headquartered in Mumbai. It was established in 1945 as Mahindra & Muhammad and later renamed as Mahindra & Mahindra. Part of the Mahindra Group, M&M is one of the largest vehicle manufacturers by production in India. Its subsidiary Mahindra Tractors is the largest manufacturer of tractors in the world by volume. It was ranked 17th on a list of top companies in India by Fortune India 500 in 2018. Its major competitors in the Indian market include Maruti Suzuki and Tata Motors.
Gear noise is a common challenge that all gear manufacturers must contend with. In tractors, while it is often sufficiently low in intensity to not pose a significant issue, there are instances where gear whine may occur which is noticeable. In such cases, identifying the source and effectively addressing the problem can prove to be particularly difficult. This paper addresses the root cause analysis carried out for the evaluation of factors influencing whine noise behavior of Spiral bevel gear pair (SO2) in a tractor transmission system. Numerous publications have been published on gear noise of spiral bevel gear pair, too many to list here. However, once the gearbox assembled into the transmission, such models are of limited practical value. The work explained in this paper is a typical example offers avenues in correcting the issue using more limited means.
PU foam shows a excellent energy absorbing dissipation properties during impact load so it commonly used in car seats, cabin and crash protection system. Specifically, in vehicle seats PU foams play a critical role in protecting occupants during crash scenarios by absorbing energy, distributing forces, and improving seatbelt performance, additionally providing countermeasures for head impact protection. The movement of the seat and the direction of the force during crash testing are highly unpredictable. The material behaviour of PU foam is captured using an isotropic, hyper-elasticity-based constitutive model available in LS-DYNA through MAT_083. This model is designed to take into account the foam's compressibility, sensitivity to strain rates, low Poisson's ratio, and hysteresis. The characterization of a PU foam with a nominal density of 65 kg/m3 was performed using quasi-static compressive testing of 0.01/s and dynamic compressive testing of 1/s,13/s, 120/s, as well as a quasi-static tensile test of 0.01/s. The material response data were used to calibrate the LS-DYNA foam model MAT-FU CHANG FOAM MAT-083. Calibration of the LS-DYNA material card (*MAT_FU_CHAN_FOAM MAT-083) was performed using coupon-level test data. The goal was to accurately simulate the foam's behaviour under varying strain rate conditions and extract the deformation pattern. Finally, the simulations were conducted with the same geometry and loading conditions as the experimental setup. The performance of the material card was validated by comparing simulation results with experimental data, demonstrating its ability to replicate foam behaviour under crash conditions.
This paper focuses on the cabin sound quality refinement and the tactile vibration reduction during horn application in the electric vehicle. A loud cracking sound inside the cabin and higher accelerator pedal vibration are perceived while operating the horn. Sound diagnosis is carried out to find out the frequencies causing the cracking noise. Transfer path analysis is conducted to identify the nature of noise and the predominant path through which forces transfer. Based on finding from TPA, various recommendations are evaluated which reduced the noise to a certain extent. Operational Deflection Shape (ODS) is conducted on the horn mounting bracket and on the body to identify the component having higher deflection at the identified frequencies. Recommendations like DPDS improvement on the horn bracket and the body is assessed and the effect of each outcome is discussed. With all the recommendations proposed, the cabin noise levels are reduced by ~ 8 dB (A) and the accelerator pedal vibration levels are reduced by ~ 40%. Sound quality parameter which needs to be considered during the horn selection is explained. The modal criteria which must be taken into account during development phase to avoid the horn cracking noise and tactile vibration is also proposed.
Body-on-frame vehicles are well-regarded for their durability and off-road capabilities, but their structural design often makes them more vulnerable to noise, vibration, and harshness (NVH) issues. Vibrations originating from uneven roads are transmitted through the suspension and steering assemblies, sometimes resulting in rattles or other disturbances. These vibrations can be amplified by the inherent flexibility in the body-to-frame mounting system. In such vehicles, the steering system plays a critical role in driver comfort and is highly sensitive to vibrational inputs from the road surface, especially on coarse or uneven terrain. Occasionally, these inputs result in subtle rattle noises that are perceptible only to the driver and may not be detected under controlled testing environments. This poses a challenge for engineers trying to isolate and resolve such intermittent NVH phenomena. Identifying the source requires a combination of real-world driving evaluations, structural analysis, and vibration measurement techniques. This paper presents a case study of an intermittent steering-related rattle noise in a body-on-frame D-SUV with a column EPS steering system. A systematic investigation using on-road testing and accelerometer-based diagnostics was conducted. Through targeted design enhancements focused on improving system stiffness and connection integrity, the issue was resolved effectively. The approach outlined offers a replicable methodology for diagnosing and mitigating similar NVH concerns in other vehicle platforms, thereby contributing to improved driver comfort and product refinement.
Higher road noise is perceived in the cabin when the test vehicle encounters road irregularities like bump or pothole in the public roads. The transfer of transient road inputs inside the body caused objectionable cabin noise. Measurements are conducted at different road surfaces to identify the patch where the objective data well correlated with the noise measured at the public road. Wavelet analysis is carried out to identify the frequency zones since the events are transient in nature. TPA is carried out in time domain to identify the nature of the noise and the dominant path through which the transient road forces are transferring inside the body. Based on the outcome of TPA, various countermeasures like reduction of dynamic stiffness of suspension bushes, TMDs on the path are proposed to reduce the structure borne noise. Criteria which need to be considered for reduction of cabin noise due to transient road inputs is also discussed.
