Abstract This study adopted a combined experimental and numerical approach to investigate acoustic resonance phenomena in aseroengine compressors. Experimental results demonstrate that intense acoustic resonance occurs at a characteristic frequency of 1,402 Hz when the rotational speed is within the range of 9,780 – 1 0,020 r / min , with a peak sound pressure level reaching 152 dB. Subsequently, four serial flat-plate cascade models were established and analyzed via the Lighthill acoustic analogy. The model with an interplate spacing ratio d / h = 3 and a chord-to-thickness ratio c / h = 7 exhibits first-order resonance at 610 Hz. At this frequency, the sound pressure level exceeds 170 dB, accompanied by distinct frequency-locking behavior. In contrast, the second-order acoustic resonance at 1,140 Hz remains relatively weak. Reducing the length of the downstream plate increases the resonance frequency to 630 Hz and reduces the sound pressure level to 160 dB. Increasing the plate spacing suppresses first-order resonance, limiting the sound pressure level to 140 dB, but strongly excites intense second-order acoustic resonance exceeding 160 dB. The combined strategy of enlarging plate spacing and reducing plate thickness effectively suppresses acoustic resonance altogether, maintaining the sound pressure level at 140 dB. These findings indicate that strategic adjustments of geometric parameters can effectively modulate vortex-acoustic coupling mechanisms, providing important references for suppressing acoustic resonance in compressors.
Industrial robots equipped with an external rail can enlarge the workspace and improve reachability for spraying large complex curved components. However, workpiece geometric deformation makes offline path planning based on ideal CAD models difficult to adapt to actual geometry. Moreover, the external rail position and spraygun tool-axis posture affect robot motion performance. Therefore, this study proposes a point-cloud-driven spray path generation and redundancy-parameter optimization method for robotic spraying of large complex curved components. First, on-site scanned point clouds are used as input, and a point-cloud-based path generation method combining the slice orthogonal projection algorithm (SOP) and hierarchical path planning framework (HPPF) is proposed. Then, locally refined B-spline smoothing and Gaussian-weighted moving average filtering are combined to improve path smoothness and normal-vector sequence continuity while constraining geometric deviation. Furthermore, for the rail-mounted robotic spraying system, a robot configuration performance metric (RCPM) considering joint limits, kinematic singularities, and spatial collision constraints is established, and the constriction-factor-based particle swarm optimization algorithm (CFPSO) is used to optimize the external rail displacement and spray-gun tool-axis rotation angle. Simulation and spraying experiments show that the proposed method improves spray path quality and robot motion stability. Compared with optimized interpolation Bspline smoothing, the maximum spatial error is reduced from 0.672 mm to 0.344 mm, and the root-mean-square error from 0.209 mm to 0.147 mm. Compared with principal component analysis normal estimation, the average normal angular increment decreases from 0.415 degrees to 0.019 degrees , and the average cumulative angular variation of the six joints decreases from 589.1 degrees to 464.5 degrees In comprehensive spraying experiments, the coating thickness range narrows from 47.9-205.3 & micro;m to 49.3-70.8 & micro;m, and the standard deviation decreases from 22.498 & micro;m to 3.454 & micro;m, verifying the effectiveness and engineering applicability of the method.
Microwave-assisted pyrolysis of oil shale offers a promising route for cleaner thermal conversion, yet its performance is often constrained by non-uniform heating and suboptimal oil yields. This study investigates how geometric design, specifically the waveguide aspect ratio (AR) and sample aspect ratio (AR '), shapes electromagnetic-thermal coupling and influences heating performance, complementing the conventional focus on operational parameters such as power and on limited single-parameter geometric variations. A fully coupled three-dimensional model incorporating electromagnetic fields, heat transfer, chemical kinetics and Darcy flow is developed to explore these effects. The results show that AR and AR ' jointly regulate a balance between interference-driven field structuring (including quasi-first-mode behaviour and geometry-dependent field inten sity |E|2 distributions) and conductive homogenisation, which together explain the contrasting sensitivities of heating rate and temperature uniformity. An intermediate waveguide aspect ratio (AR = 2) increases the light-oil yield by 13.3% relative to AR = 5, while AR ' = 1.78 consistently minimises the coefficient of temperature variation (COPT) due to a more coherent axial field pattern. Sensitivity tests and uncertainty quantification (including permittivity perturbations and prediction-band analysis) support the robustness of these trends. The mutual compatibility of the optimal AR and AR ' and weak-attenuation within the sample provide a practically transferable guideline for scaling reactor designs to different operational or geometric regimes.
A novel dynamic analysis method integrating image recognition with the Rayleigh-Ritz method is proposed for arbitrarily shaped composite thin-walled plates (ASTWPs) with complex boundary constraints in hygrothermal environments. In the present approach, geometric features of the ASTWPs are automatically extracted from images, and the corresponding dynamic models are constructed, thereby enabling highly efficient modeling. First, the geometric contour of the ASTWPs is obtained through image calibration, geometric feature recognition, and boundary extraction. Subsequently, the plate domain is partitioned into multiple substructures to improve computational convergence and efficiency. Based on this partition, Gaussian integration points are generated within the substructures using mapping techniques to facilitate global energy integration. Meanwhile, a set of discretized admissible displacement functions tailored to various substructures is constructed utilizing an improved Schmidt orthogonalization procedure. Furthermore, displacement compatibility between substructures is enforced, and arbitrary boundary constraints are imposed by virtual spring techniques. The Rayleigh-Ritz method is employed to determine the modal characteristics and dynamic behavior of the ASTWPs by formulating the system energy from the kinetic and potential contributions of each substructure, while incorporating the external hygrothermal potential and prescribed loading conditions. Finally, a series of numerical studies and modal tests are conducted to validate the convergence, accuracy, and computational efficiency of the proposed method. For various ASTWP types, the proposed method yielded solutions in approximately 20 s, with a maximum error of 0.81% relative to the finite element method. The results indicate that the proposed method is suitable for the dynamic analysis of ASTWPs under complex hygrothermal conditions.
This paper presents a modelling approach to investigate the vibration behaviour of Type III composite hydrogen storage tank-pipeline assembly (TCHSTPA) for hydrogen powered aircraft. A generalised dynamic model is established using the virtual spring method to integrate straight pipes, curved pipes and hydrogen storage tanks. The displacement field of the strain neutral surface is expressed as the superposition of modified orthogonal polynomials. The energy formulation of the TCHSTPA is derived by combining Lagrange’s equation with Mindlin-Reissner shell theory and Timoshenko beam theory. Furthermore, a displacement compatibility condition between the hydrogen storage tank and pipelines are proposed to resolve the inconsistency in degrees of freedom during structural coupling. The developed model is assessed through comparisons with finite element simulations and experimental measurements. The influences of geometric parameters, strap spacing, damping coefficients and virtual spring stiffness on the dynamic characteristics of the TCHSTPA are systematically investigated. Numerical results demonstrate that the vibration responses of the coupled system can be effectively regulated by adjusting structural dimensions, strap arrangements, damping properties and virtual spring parameters. The results establish a baseline framework for characterising the intrinsic coupled vibration behaviour and parameter-dependent response trends of TCHSTPA under prescribed harmonic excitation.