Umicore N.V.. formerly Union Minière, is a multinational materials technology company headquartered in Brussels, Belgium.Formed in 1989 by the merger of four companies in the mining and smelting industries, Umicore has since reshaped itself into a more technology-focused business encompassing such areas as the refining and recycling of precious metals and the manufacture of specialised products from precious metals, cobalt, germanium, zinc, and other metals. The company has been a component of Belgium's benchmark BEL20 stock market index since its 1991 inception.To symbolise this trend of moving away from mining and the production of commodities and base metals, the group Union Minière changed its name to Umicore in 2001.
Reaction kinetics lie at the center of reactive systems engineering, yet discovering them from data and incorporating them into predictive simulations remain time-consuming tasks that slow down model-based process design and control. To address this challenge, we introduce the Exponential Scaling Formation Consumption Neural Network (+/- ExpNet), a physics-inspired neural network architecture that can learn kinetics directly from integral reactor data and easily integrates with computational fluid dynamics to accelerate multiscale reactive simulations. The +/- ExpNet models latent formation and consumption rates which are subtracted to compute source terms, and enforces atom conservation as a hard constraint by exploiting the principles of elementary reaction kinetics. Using two catalytic and one non-catalytic test case we demonstrate that this relatively simple approach represents source terms with surprising accuracy, in most cases en par with previous approaches that require significantly more specific knowledge of the reaction system. Further, we employ the +/- ExpNet to extract kinetics for the direct DME synthesis using integral reactor data from literature. In doing so, we simultaneously derive kinetic models for both catalysts in this dual-catalyst system, without having to specify the global reactions occurring on the two catalysts or any thermodynamic constraints. This demonstrates that the +/- ExpNet provides a general and interpretable framework for automated kinetic modeling and efficient multiscale reactive simulations. Its simplicity makes it easy to integrate into big data frameworks and high-throughput experimentation, offering a path to make accurate kinetic models more widely accessible across catalysis, combustion, and other data-rich chemical disciplines.
Solid-state batteries (SSBs) are currently regarded as a potential alternative to dominant liquid-electrolyte Li-ion batteries, possibly offering higher energy and power densities. In this regard, lithium argyrodite solid electrolytes have received considerable attention due to their high ionic conductivity and mechanical softness allowing straightforward integration into SSB cells. However, they face issues with (electro)chemical stability leading to an accelerated capacity fade. Thus, mitigation strategies have been pursued via chemical substitution. Here we investigate the effects of Zn2+ incorporation into the argyrodite system Li6-2x Zn x PS5X (X = Br, Cl, I). We show that there is limited solubility of Zn2+ reaching maximum values of x = 0.2 for Li6-2x Zn x PS5Cl and Li6-2x Zn x PS5Br while incorporation is not possible for Li6PS5I. Using complementary techniques of X-ray-, neutron powder diffraction and 31P magic-angle spinning nuclear magnetic resonance spectroscopy in combination with machine-learning based molecular dynamics (MD) we show that Zn2+ incorporation increases the S2-/X- site inversion for X = Br- but has virtually no effect for X = Cl-. Interestingly, the shift of certain vibrational bands observed via Raman spectroscopy measurements correlates well with an increased site disorder. Maximum ionic conductivities are detected for a Zn2+ content of x = 0.1. However, no improvement in cycle life was observed when the material was evaluated in solid-state batteries. Nevertheless, a slight enhancement in stability under ambient conditions was indicated by time-dependent H2S evolution measurements.
Charge and discharge of solid-state lithium-ion battery electrodes cause significant volume changes, which can compromise mechanical stability and affect battery performance. In a confined space, the volume cannot expand freely, leading to significant pressures induced by local microstructural changes within the battery composite electrode. While volume change appears to be less critical in batteries with liquid electrolytes, which have the advantage of not transferring stresses, it becomes much more critical in composite electrodes with solid electrolytes. In this work, we present a new full mechano-electrochemical computational workflow model for the simulation of 3D-resolved electrode microstructures functioning in a solid-state battery cell. The model accounts for the bi-directional coupling between mechanics, electrochemistry and transport processes. Two mechano-electrochemical coupling approaches were compared. Second, the overall mechanical behavior and the spatial distribution of mechanical strain and stress of solid phases within the composite cathode, arising from active material (de)lithiation-induced volume changes and under external pressure was studied. Third, the numerical galvanostatic cycling results were validated against experimental data.
Solvent extraction involves coupled phenomena that strongly affect the performance at large scale. Given the urgent need to reduce process development costs and time in the hypercompetitive context of recycling, it is essential to adapt our R&D methodology, historically based on large-scale pilot tests. In this context, we have proposed to predict the drop size distribution in liquid-liquid contactors based on small-scale instrumented experiments, and proper numerical simulations. This method was tested on a case of industrial interest, the recovery of copper, considering the actual process fluids (although mass transfer was not considered) and a scale jump of 40 in volume. Tests carried out in a semi-industrial mixer-settler at Umicore's facilities in Olen revealed a quite satisfactory agreement between measurements and predictions, hence validating the relevance of the proposed approach in order to guide industrial transposition and provide early stage-evaluation of relevant performance criteria such as interfacial area and phase entrainment due to tiny droplets. The benchmark also highlighted the need to reduce the empiricism of the models used in population balance equations to describe droplet breakup and coalescence under real conditions, in order to facilitate the transposition from one chemical system to another.
Anode-free concept can fully utilize the unmatched theoretical specific energy of lithium-metal battery. However, the low stability of the anode interface, including both the morphology of Li metal and the solid electrolyte interphase (SEI), hinders the practical battery implementation and creates safety concerns. In this work, sulfolane-based localized high-concentration electrolyte (LHCE) is applied as a sustainable and applicable electrolyte for anode-free Li-metal batteries (AFLMBs). The effects of important factors, including type of anode current collector, electrolyte properties, and cycling conditions, are explored in terms of clarifying their impact on the structural and functional properties of LFP & Vert;Cu cells. Flammability tests indicate that the electrolyte is nonflammable by direct ignition under the applied conditions, which is highly beneficial for the safety and sustainability of the AFLMB. The performance of SL-based LHCE is tested for Li plating-stripping reaction on Cu-engineered substrates, where the microporous Cu substrates display major improvement, which can be attributed to their enlarged active surface area and open and highly interconnected porous structure. The influence of the key operation parameters, state of charge, depth of discharge, and current density is explored, and useful correlations of these factors with the anode structural properties and battery cycling stability are established.