Graphite (stacked graphene layers) has been modified in several ways to enhance its potential properties/utilities. One approach is to convert graphite into a unique 'nano-graphite' form. Nano-graphite consists of few-layered graphene, multi-layered graphene, graphite nanoplatelets, and other graphene aggregates. Graphite can be converted to nano-graphite using physical and chemical methods. Nano-graphite, similar to graphite, has been reinforced in conducting polymers/thermoplastics/rubbery matrices to develop high-performance nanocomposites. Nano-graphite and polymer/nano-graphite nanomaterials have characteristics that are advantageous over those of pristine graphitic materials. This review basically highlights the essential features, design versatilities, and applications of polymer/nano-graphite nanocomposites in solar cells, electromagnetic shielding, and electronic devices.
Oil spills necessitate the development of effective methods for preventing their damaging effects on the environment. A number of physical, chemical, thermal, and biological methods are used to combat oil spills. Among them, sorption is considered to be efficient in removing thin oil films from water surfaces. Currently, there is an urgent need for simple methods of obtaining oil sorbents that include a magnetosensitive component to optimize the process of removing oil from the water surface. The purpose of the work is to obtain and research oil sorbents resistant to destruction, with increased bulk density and complex magnetosensitivity, based on thermally expanded graphite (TEG) with the inclusion of micro- and nano-particles of iron and its oxides. The structure and composition of the new composite material was characterized using scanning electron microscopy, energy dispersive X-ray analysis, X-ray diffractometry, thermogravimetric analysis, and laser diffraction particle sizing. The composite sorbent comprised TEG with the inclusion of iron-containing magnetosensitive particles. Metal-carbon nanoparticles (MCN) were used as the magnetosensitive component; they had a magnetosensitive iron core covered with a carbon shell. We used two methods of synthesis, namely (i) mechanical mixing of the TEG flakes and MCN particles, and (ii) applying a thermal shock (microwave processing) to the mixture of graphite intercalated with sulphuric acid and micro- and nanoparticles of iron and iron oxides. In the first case, MCN particles were fixed on the faces, edges, and other surface defects of the TEG flakes due to intermolecular forces, coordinate bonds, and electrostatic interaction. The strong adhesion of magnetosensitive iron/iron oxide and TEG particles in the second case was due to the mutual dissolution of iron and carbon components during the thermal shock, which formed an interfacial layer in which iron carbide is present. The presence of magnetosensitive components in the structure of the proposed oil sorbents allows the use of magnetic separation for the localization and removal of oil spills, increases the density of sorbents, and, accordingly, leads to a decrease in windage while retaining the advantageous properties of thermally expanded graphite. According to the results of laboratory studies, the efficiency of removing oil from the water surface is not lower than 95–96%.
In this study, activated carbons derived from walnut shells (CA-N) and apple wood (CA-M) were used as adsorbents to remove cobalt(II) and strontium(II) ions from aqueous solutions. The novel materials were obtained using nitric acid (CA-Mox) and nitric acid/urea mixture (CA-Mox-u, CA-Nox-u) as oxidizing agents. The physical–chemical characteristics of activated carbons were determined from nitrogen sorption isotherms, SEM-EDX, FTIR, pH metric titrations, the Boehm titration method and elemental analysis. The results of batch experiments indicate that maximum adsorption can be achieved in broad pH ranges: 4–8 for Co(II) and 4–10 for Sr(II). The maximum adsorption capacities of Co(II) and Sr(II) on oxidized activated carbons at pH = 4 are: CA-Mox, 0.085 and 0.076 mmol/g; CA-Mox-u, 0.056 and 0.041 mmol/g; and CA-Nox-u, 0.041 and 0.034 mmol/g, respectively. The mathematical models (pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models, and Langmuir, Freundlich, Dubinin–Radushkevich, and Temkin–Pyzhev isotherm models) were used to explain the adsorption kinetics, to study the adsorption mechanism and predict maximum adsorption capacity of the adsorbents. The adsorption mechanisms of toxic metal ions on activated carbons were proposed.
Global warming and climate changes are among the biggest modern-day environmental problems, the main factor causing these problems is the greenhouse gas effect. The increased concentration of carbon dioxide in the atmosphere resulted in capturing increased amounts of reflected sunlight, causing serious acute and chronic environmental problems. The concentration of carbon dioxide in the atmosphere reached 421 ppm in 2022 as compared to 280 in the 1800s, this increase is attributed to the increased carbon dioxide emissions from the industrial revolution. The release of carbon dioxide into the atmosphere can be minimized by practicing carbon capture utilization and storage methods. Carbon capture utilization and storage (CCUS) has four major methods, namely, pre-combustion, post-combustion, oxyfuel combustion, and direct air capture. It has been reported that applying CCUS can capture up to 95% of the produced carbon dioxide in running power plants. However, a reported cost penalty and efficiency decrease hinder the wide applicability of CCUS. Advancements in the CCSU were made in increasing the efficiency and decreasing the cost of the sorbents. In this review, we highlight the recent developments in utilizing both physical and chemical sorbents to capture carbon. This includes amine-based sorbents, blended absorbents, ionic liquids, metal-organic framework (MOF) adsorbents, zeolites, mesoporous silica materials, alkali-metal adsorbents, carbonaceous materials, and metal oxide/metal oxide-based materials. In addition, a comparison between recently proposed kinetic and thermodynamic models was also introduced. It was concluded from the published studies that amine-based sorbents are considered assuperior carbon-capturing materials, which is attributed to their high stability, multifunctionality, rapid capture, and ability to achieve large sorption capacities. However, more work must be done to reduce their cost as it can be regarded as their main drawback.
Among typical energy storage devices, supercapacitors play a predominant role in industry and our life owing to their rapid charge/discharge rate, superior lifespan, high power density, low cost, and outstanding safety. However, their low energy density has severely hindered their further development. For active electrode materials, graphene-based mesoporous nanosheets (GMNs) can combine the advantages from graphene and mesoporous materials, which can be applied to significantly enhance the energy density of supercapacitors. Here, we review the recent advances in GMNs for supercapacitors, focusing on in-plane mesoporous graphene and sandwich-like graphene-based heterostructures. Firstly, the synthesis of in-plane mesoporous graphene with ordered and disordered mesopores for supercapacitors is introduced. Secondly, sandwich-like graphene-based heterostructures are classified into mesoporous carbon/graphene, mesoporous heteroatom-doped carbon/graphene, mesoporous conducting polymer/graphene, and mesoporous metal oxide/graphene, and their applications in supercapacitors are discussed in detail. Finally, the challenges and opportunities of GMNs for high-performance supercapacitors are proposed.
The low selectivity of materials to gases of a similar nature may limit their use as sensors. Knowledge of the adsorption kinetic characteristics of each gas on the surface of the material may enable the ability to identify them. In this work, copper-containing silicon–carbon films were formed using electrochemical deposition on the Al2O3 substrate with interdigitated Cr/Cu/Cr electrodes. These films showed good adsorption characteristics with several different gases. The adsorption kinetics of nitrogen dioxide, sulfur dioxide, and carbon monoxide on the film surface were investigated by the change in the resistivity of the material. Pseudo-first-order and pseudo-second-order kinetics, Elovich, Ritchie, and Webber intraparticle diffusion models were applied. It was found that the largest approximation factor and the lowest Root-Mean-Square Error and Mean Bias Error for all three gases were for the Elovich model. The advantages of silicon–carbon copper-containing films for gas sensor applications were shown. An algorithm for gas recognition was proposed based on the dependence of the change in the resistivity of the material under stepwise gas exposure. It was found that parameters such as the values of the extrema of the first and second derivatives of the R vs. t dependence during adsorption and the slope of R vs. t dependence in the Elovich coordinates are responsible for gas identification among several one-nature gases.
Graphene is one of the most significant carbon nanomaterials, with a one-atom-thick two-dimensional nanostructure. Like other nanocarbons, graphene has been used as a polymer reinforcement. This review explores the impact of graphene and graphene-based nanocomposites on aerospace applications. The fabrication and indispensable features of graphene-derived nanocomposites have been considered. Numerous polymers and nanocomposites have been employed for aerospace systems such as reinforced thermosetting/thermoplastic polymers and epoxy/graphene nanocomposites. Moreover, graphene-modified carbon-fiber-based composites have been discussed for the space sector. Aerospace nanocomposites with graphene have been investigated for superior processability, structural features, morphology, heat stability, mechanical properties, flame resistance, electrical/thermal conductivity, radiation protection, and adhesion applications. Subsequently, epoxy and graphene-derived nanocomposites have been explored for heat/mechanically stable aerospace engineering structures, radiation-shielding materials, adhesives, coatings, etc.
Non-graphitic carbons (NGCs), such as glass-like carbons, pitch cokes, and activated carbon consist of small graphene layer building stacks arranged in a turbostratic order. Both structure features, including the single graphene sheets as well as the stacks, possess structural disorder, which can be determined using wide-angle X-ray or neutron scattering (WAXS/WANS). Even if WANS data of NGCs have already been extensively reported and evaluated in different studies, there are still open questions with regard to their validation with WAXS, which is usually used for routine characterization. In particular, using WAXS for the damping of the atomic form factor and the limited measured range prevent the analysis of higher-ordered reflections, which are crucial for determining the stack/layer size (La, Lc) and disorder (σ1, σ3) based on the reflection widths. Therefore, in this study, powder WANS was performed on three types of carbon materials (glass-like carbon made out of a phenol-formaldehyde resin (PF-R), a mesophase pitch (MP), and a low softening-point pitch (LSPP)) using a beamline at ILL in Grenoble, providing a small wavelength and thus generating WANS data covering a large range of scattering vectors (0.052 Å−1 < s < 3.76 Å−1). Merging these WANS data with WANS data from previous studies, possessing high resolution in the small s range, on the same materials allowed us to determine both the interlayer and the interlayer structure as accurately as possible. As a main conclusion, we found that the structural disorder of the graphene layers themselves was significantly smaller than previously assumed.
This study was conducted to assess the effects of amending tropical sandy soils with biochar derived from agro-industrial wastes on the leaching and utilization of nitrogen (N) by maize. The experiment was conducted in pots in a greenhouse with two sandy soil types and two different biochars. The biochars used in this experiment were preselected in a preliminary column experiment that assessed the N retention capacities of the different biochars and those that exhibited the best retention capacities chosen for experimentation. The biochars evaluated included saw dust, rice husk and corncob pyrolyzed at 500 °C and the results from the column leaching experiment showed that sawdust biochar had superior retention capacities for both NO3− and NH4+, followed by rice husk biochar. The pot experiment utilized sawdust and rice husk biochars applied at rates of 0, 20 and 40 t/ha to the soil treated with different N sources including cow dung and ammonium sulfate and growing maize on the amendments for two seasons with each season lasting for five weeks. The soils were leached on the 14th and 28th days after planting to determine the amount of leachable N. Biochar amendments reduced the leaching of NO3−N and NH4+N with no significant differences observed between biochar types, but between soil types. The abatement of leaching by biochar amendments consequently enhanced N uptake by maize and dry matter production and thus, agro-industrial waste biochar amendment is recommended for reducing leaching in tropical sandy soils.
(1) Background: Uncontrolled inflammation often contributes to life-threatening sepsis sequela such as multi-organ dysfunction syndrome (MODS), and is accompanied by abnormal levels of pathological and damage-associated molecular patterns (PAMPs & DAMPs) in biological fluids. Activated carbon or charcoal (AC) of new generation with ameliorated biocompatibility has spurred renewed interest in the regulation of these toxins' levels in inflammation states. (2) Methods: We searched PubMed, Google Scholar, ScienceDirect, Researchgate, and other sources for the relevant literature from 1550 B.C. till 2022 A.C. (3) Results: Laboratory and clinical investigations demonstrate that activated carbon or charcoal (AC) mitigates inflammation in different pathological states when applied orally, per rectum, or in a hemoperfusion system. AC protects the microbiome and bone marrow, acts as an anti-inflammatory and anti-oxidant remedy, and recovers the plasmatic albumin structure. The mechanism of AC action is related to a non-selective (broad-range) or/and selective adsorption of PAMPs & DAMPs from biological fluids. A high-adsorptive capacity towards noxious substances and application of AC as early as possible seems paramount in inflammation treatment for preventing sepsis and/or multi-organ failure. (4) Conclusion: AC could be considered an adjunctive treatment for preventing sepsis and/or multi-organ failure.
Novel customised carbon monoliths with a high specific surface area were synthesised by carbonisation plus activation of dehydrated whey powders, a biomass byproduct of the dairy industry. The whey powders were casted directly by pouring them into a desired mould. After a pseudo-sintering process promoted by the self-reaction of the whey components (mostly lactose and whey proteins) at moderate temperatures (ca. 250 °C), 3D porous carbons were obtained. The process did not require any binder or external overpressure to prepare the 3D porous carbons. Upon thermal activation with CO2 or chemical activation with H3PO4 and KOH, the shape of the monolithic structure was preserved after the development of a microporous network (SBET up to 2400 m2/g). Both thermal and chemical activation had little effect on the macroporosity of the monoliths. Activation of these 3D carbons had to be performed with care to avoid heterogeneous skin/core activation and/or overactivation. Highly porous monoliths (SBET of 980 m2/g; open porosity of 70%) with outstanding compressive strength (10 MPa) could be obtained by thermal activation (CO2) of whey monoliths at 850 °C for 1.5 h. Additionally, the use of whey as a precursor provided the carbon monolith with a relatively high nitrogen content (ca. 3 wt.%).
This paper presents a comparison of traditional thermal and chemical reduction methods with more recent ionizing radiation reduction via gamma rays and electron beams (e-beams). For GO, all synthesis protocols were adapted to increase production scale and are a contribution of this work. The typical Raman D-band of the GO was prominent (ID/IG ratio increased sixfold). When comparing the GO reduction techniques, dramatic differences in efficiency and GO particle characteristics were observed. Although thermal and chemical reduction are effective reduction methods, as shown through the use of FTIR spectroscopy and the C/O ratio from EDS chemical analysis, the thermal process renders great weight losses, whereas chemical processing may involve the use of hazardous chemical compounds. On the other hand, comparing the gamma rays and e-beam for 80 kGy, the Raman spectra and chemical analysis suggested that the e-beam caused a greater GO reduction: C/O ratio from EDS of 5.4 and 4.1, respectively. In addition to being fast and effective, ionizing radiation reduction processes allow easier control of the reduction degree by adjusting the radiation dose. When the dose increased from 40 to 80 kGy, the Raman spectra and EDS showed that the ID/IG and C/O ratios increased by 15 and 116%, respectively.
This work evaluates the potential for obtaining graphitizable precursors from domestically available coal as a possible solution to the declining availability of high-quality precursors and projected rapid growth driven by demand for synthetic graphite in the US. The graphitizability of a coal-derived synthetic pitch (Synpitch) obtained by a novel solvent extraction process is compared with a commercially available petroleum pitch. The process outlined in this paper offers the advantages of lower temperature, pressure, and hydrogen addition requirement. An upgraded (higher H/C) aromatic pitch with low quinoline insoluble (QI) and ash content is obtained. The distinctions between the pitches have been characterized using Fourier transform infrared spectroscopy, nuclear magnetic resonance, and thermogravimetric analysis/differential scanning calorimetry. The pitches have been graphitized at 2500 °C and characterized by X-ray diffraction and transmission electron microscopy for graphitic quality assessment. The Synpitch showed larger crystallites (by over 50%) and markedly better nanostructure compared to the commercial pitch used in this study. The structural differences between the pitches are highlighted here to explain the significantly better graphitic quality of the Synpitch.
In this study, carbon nanofibers were synthesized by the catalytic pyrolysis of trichloroethylene (CNF-Cl) and its mixture with acetonitrile (CNF-Cl-N). The addition of acetonitrile resulted in the incorporation of nitrogen in the CNF (0.33 at%), the removal of chlorine, an increase in oxygen-containing functional groups on the surface (from 1.6 to 3.6 at%), and an increase in the volume of mesopores (from 0.35 to 0.41 cm3·g−1) and macropores (from 0.115 to 0.393 cm3·g−1). The study of 2,4-DCBA adsorption on both CNFs revealed that the adsorption capacity showed dependence with a maximum on the 2,4-DCBA concentration in the solution, which was attributed to the electrostatic interactions of adsorbate with adsorbent at various pHs. The adsorption forces were effective over distances greater than the size of the 2,4-DCBA molecule, indicating volume pore filling. The maximum adsorption capacity occurred at 0.7–1.2 mM and a pH of 3.4 ± 0.1. CNF-Cl-N exhibited lower 2,4-DCBA adsorption than CNF-Cl-N due to its lower specific surface area, lower micropore volume, and higher concentration of oxygen-containing groups on the surface. However, these differences were not significant, suggesting that CNFs produced from both chlorine-containing wastes and their mixtures with nitrogen-containing compounds can be effectively used for water treatment to remove 2,4-DCBA.
Biomass-derived activated carbon is one of the promising electrode materials in supercapacitor applications. In this work bio-waste (oil extracted from eucalyptus leaves) was used as a carbon precursor to synthesize carbon material with ZnCl2 as a chemical activating agent and activated carbon was synthesized at various temperatures ranging from 400 to 800 °C. The activated carbon at 700 °C showed a surface area of 1027 m2 g−1 and a specific capacitance of 196 F g−1. In order to enhance the performance, activated carbon was doped with nitrogen-rich urea at a temperature of 700 °C. The obtained activated carbon and N-doped activated carbon was characterized by phase and crystal structural using (XRD and Raman), morphological using (SEM), and compositional analysis using (FTIR). The electrochemical measurements of carbon samples were evaluated using an electrochemical instrument and NAC-700 °C exhibited a specific capacitance of 258 F g−1 at a scan rate of 5 mV s−1 with a surface area of 1042 m2 g−1. Thus, surface area and functionalizing the groups with nitrogen showed better performance and it can be used as an electrode material for supercapacitor cell applications.
In the present study, a series of carbon-based nanocomposites based on recycled thermoplastic polyurethane (TPU) matrix and MWCNT fillers synthesized in a laboratory environment were prepared at various loadings and assessed in terms of their functional thermal, dielectric, and rheological properties, as well as their ohmic heating capability, for self-healing applications in extrusion-based 3D printing technologies. The synthesis of nanomaterials focused on the production of two different types of carbon nanotubes (CNTs) via the chemical vapor deposition (CVD) method. A comparative assessment and benchmarking were conducted with nanocomposite filaments obtained from commercial nanomaterials and masterbatches with MWCNTs. For all the polymer nanocomposites, samples were prepared at additive contents up to 15 wt.% and filament feedstock was produced via the melt-extrusion process for 3D printing; these were previously characterized by rheological tests. The measurements of thermal and electrical conductivity resulted in a selected composition with promising ohmic heating capability. As a preliminary assessment of the self-healing ability of the above samples, artificial cracks were introduced on the surface of the samples and SEM analysis took place at the crack location before and after applying voltage as a measure of the effectiveness of the material remelting due to the Joule effect. Results indicate a promising material response with a partial restoration of artificial cracks.
Even though graphene-family materials (GFMs) hold great promise for various applications, there are still significant knowledge gaps in ecotoxicology and environmental risk assessment associated with their potential environmental impacts. Here, we provide a critical perspective on published ecotoxicity studies of GFMs based on meticulous bibliometric research. Based on the results of our review paper, in order to fill in the current critical knowledge gaps, the following issues are recommended for consideration: performing more studies on GFMs’ effects at environmentally relevant concentrations and more field and laboratory studies with marine and terrestrial organisms. It is also recommended to assess the ecotoxicity of GFMs in more environmentally relevant conditions, such as in trophic chain transfer studies and by multispecies exposure in micro- or mesocosms, as well as gaining insights into the interactive effects between GFMs and environmental pollutants. It was also revealed that despite their widespread detection in different environmental compartments the potential impacts of GFMs in complex test systems where hierarchical trophic organisation or trophic transfer studies are significantly under-represented. One of the main causes was identified as the difficulties in the physicochemical characterisation of GFMs in complex terrestrial test systems or aquatic micro- and mesocosm studies containing a sediment phase. The lack of tools for adequate characterisation of GFMs in these complex test systems may discourage researchers from conducting experiments under environmentally relevant test conditions. In the coming years, fundamental research about these complex test systems will continue to better understand the mechanism behind GFM toxicity affecting organisms in different environmental compartments and to ensure their safe and sustainable use in the future.
This paper describes a single-stage synthesis process for activated carbon using cherry seeds. The influences of the carbonization temperature and the time were investigated. Using the BET method, the surface area of the obtained activated carbons was determined, as well as the pore distribution, while SEM images provided further insight into the structure of the surface. Next, the adsorption isotherm was derived. For the test, Pd(II) chloride complex ions were used. It was found that the obtained activated carbon were suitable for palladium(II) recovery from diluted aqueous solutions. Out of the tested parameters of carbon synthesis, the most optimal one was found to be 500 °C for 3 h. Additionally, it was confirmed that the increase in the adsorption temperature affects the increase in palladium load from 1.6 mg/g at 20 °C to 15.6 mg/g at 50 °C (for the best-performing sample). This fact may suggest that the process of adsorption is associated with chemical reactions.
To investigate the influence of crosslinking methods on the releasing performance of hybrid hydrogels, we synthesized two systems consisting of Graphene oxide (GO) as a functional element and alginate as polymer counterpart by means of ionic gelation (physical method, HA−GOP) and radical polymerization (chemical method, HA−GOC). Formulations were optimized to maximize the GO content (2.0 and 1.15% for HA−GOP and HA−GOC, respectively) and Curcumin (CUR) was loaded as a model drug at 2.5, 5.0, and 7.5% (by weight). The physico-chemical characterization confirmed the homogeneous incorporation of GO within the polymer network and the enhanced thermal stability of hybrid vs. blank hydrogels. The determination of swelling profiles showed a higher swelling degree for HA−GOC and a marked pH responsivity due to the COOH functionalities. Moreover, the application of external voltages modified the water affinity of HA−GOC, while they accelerated the degradation of HA−GOP due to the disruption of the crosslinking points and the partial dissolution of alginate. The evaluation of release profiles, extensively analysed by the application of semi-empirical mathematical models, showed a sustained release from hybrid hydrogels, and the possibility to modulate the releasing amount and rate by electro-stimulation of HA−GOC.
Resistive sensing responses of the thin films obtained by dehydrohalogenation of polyvinylidene chloride (PVDC) and polyvinylidene chloride–polyvinyl chloride (PVDC-PVC) copolymer were investigated. The structure of the samples was studied by transmission electron microscopy, Fourier-transform infrared spectroscopy and Raman spectroscopy. The analyses demonstrate the formation of a porous structure based on polyyne–polyene chains. The formation of a foam-like oxidized sp-rich structure was observed for the samples obtained via the chemical treatment of the PVDC. However, a loose film with a developed structure and a lower fraction of sp-hybridized carbon was observed for KOH-treated PVDC-PVC. The resistive sensing responses of both of the dehydrohalogenated structures were measured for various concentrations of acetone, acetic acid, ammonia hydroxide, methanol, ethanol, benzene and water. The interplay between the efficiency of the dehydrohalogenation of the films, their structure and sensing selectivity is discussed.
