
When one fleet of distributed energy resources (DERs) serves a transmission system operator (TSO) for balancing and a distribution system operator (DSO) for congestion management, the two compete for the same headroom in one 15-min interval, so clearing them separately wastes flexibility. We formalise this as dual-requester, shared-capacity co-clearing and show its feasible region is a transportation polytope, so the exact optimum is polynomial-time and the question is what the deployed merit-order engine loses against it. That engine runs in O(nlogn) time and is a tight 12-approximation, exact when no asset–direction is offered to two requests; the deployed price-ascending key carries the same bound less a term set by the reservation-price spread, under 1.5 points on every calibrated quarter. One Merkle root per quarter gives O(1) on-chain settlement. On instances calibrated to a one-year, 54-DER dual-operator island pilot, the greedy stays within a mean 2.2% of the optimum and at full sharing co-clearing recovers 9.6% more welfare than sequential clearing, or 11.7% when both are solved exactly. Contention is necessary for both, each being zero under disjoint eligibility, so operators' logs show whether it can matter. The TSO/DSO tie-break is a design variable, not a convention: the merit key does not lie on the welfare–equity frontier, and a mild TSO weight Pareto-dominates it in 91% of quarters in the reconstructed pilot regime only — a share falling below 4% once the DSO request reaches two-thirds of the TSO's calibrated request, so the weight must be calibrated per market.
A heat demand forecast was integrated with sewer heat recovery and heat storage through a simplified hourly control strategy, in which the forecast set the charging and discharging of the store. Hourly household heat demand from the UK Energy Demand Research Project was forecasted 1 h ahead from past demand only, by a nonlinear autoregressive artificial neural network (ANN), seasonal ARIMA and linear regression. Repairing systematic metering spikes, each holding several hours of consumption in one hourly slot, reduced the mean absolute percentage error (MAPE) of an affected test period from 43.6% to 16.3%. All three models performed almost equally (MAPE 11.8-13.3%, against 16.2% for a seasonal naive benchmark). The ANN model had calibrated prediction intervals and stable accuracy over six training and testing periods, including the coldest UK winter in thirty years, and needed only six months of local data. The model's R2 reached 0.85 in the heating seasons of an independent dataset of 86 Edinburgh homes. With a validated heat recovery model driven by measured sewer flow and temperature, 3600 households met 56% of their demand from the sewer without storage, 64% with 0.65 m3 of PCM composite each and at most 66% with larger stores. Forecast error added only about 3% to the backup energy, whichever model was used. Demand history is therefore a sufficient forecast input, and metering data quality matters more than model choice. Storage capacity, extraction limits and the minimum wastewater temperature after recovery dominate overall performance.
The increasing deployment of residential photovoltaic (PV) systems creates growing demand for the flexible use of locally generated electricity. Since many households lack battery storage, sector-coupling approaches such as power-to-heat technologies have gained attention. Although the supervisory control of electrical and thermal subsystems has been widely studied, their integrated operation remains challenging in real residential environments.This work presents the practical implementation of an optimization-based supervisory controller for residential energy systems. The controller is based on an existing thermal energy optimization framework – originally developed for systems with biomass boilers and solar thermal collectors – and is extended to utilize surplus PV power, computing optimal schedules for controllable components.A key challenge arises from the differing dynamics of system components: while biomass boilers exhibit large time constants that allow supervisory control with sampling times of 15 min, surplus PV utilization requires significantly faster response times. To address this, two control strategies are implemented. First, a fast low-level controller operates the power-to-heat components, and its effect on the thermal system is estimated and predicted by the supervisory controller. Second, the supervisory controller explicitly incorporates surplus power utilization, enabling improved coordination between electrical and thermal subsystems.The framework has been implemented in a software product deployed in more than 40 single-family homes. The first approach has been validated in closed-loop field operation; the second has so far been evaluated offline in simulations. Practical challenges and lessons learned from deployment are discussed based on two representative buildings.
Healthcare facilities are among the most energy-intensive and critical components of modern infrastructure, operating continuously under strict reliability requirements while facing increasing pressure to decarbonize. At the same time, growing exposure to grid instability, climate-related disruptions, and sustainability demands has intensified the need for energy solutions that enhance resilience, improve efficiency, and reduce emissions. Within this context, fuel cell technologies have emerged as promising alternatives owing to their modular design, enhanced efficiency, and appropriateness for decentralized applications. Consequently, this review provides a thorough and critical evaluation of the integration of fuel cells into healthcare energy infrastructure by providing evidence across technical, economic, environmental, and regulatory domains. The work starts with an analysis of the energy requirements and resilience prerequisites particular to the healthcare sector, subsequently assessing the suitability of principal fuel cell technologies and integration strategies. Additionally, representative case studies from South Africa, the United States, Italy, Japan, and Nepal are reviewed to illustrate diverse fuel cell applications and different implementation stages across emergency power, backup systems, combined heat and power, mobile clinics, and hospitals operating with weak grid infrastructure. Finally, the paper concludes that fuel cell technologies can significantly enhance energy resilience, reduce lifecycle emissions, and provide a viable pathway toward low-carbon and reliable healthcare energy infrastructure when they are appropriately selected and integrated within healthcare-specific operational frameworks.
Seasonal thermal energy storage (sTES) can enhance Thermal Source Network (TSN) flexibility by enabling inter-seasonal energy shifting and mitigating mismatches between supply and demand. This study investigates the design and integration of a retrofit sTES into TSN, using the incampus industrial park in Ingolstadt, Germany, as a case study. A dynamic co-simulation framework is developed by coupling a MATLAB/Simscape TSN model with a physics-based sTES model developed in Modelica/Dymola. A parametric assessment varies key sTES design parameters and demand characteristics. Performance is evaluated using three indicators: sTES efficiency, demand coverage, and levelized cost of thermal service (LCOTS). Results show that improved insulation and compact geometry increase storage efficiency by up to approximately 20%, while compact geometry reduces LCOTS by approximately 15%. Increasing sTES volume improves heating and cooling coverage but can increase LCOTS by approximately 80% when the additional capacity is insufficiently utilized. A heat pump-assisted charging option extends the sTES usable temperature range and increases demand coverage by approximately 20% while storage efficiency remains nearly unchanged. In contrast, increasing the demand overlap coefficient from 20% to 50% reduces sTES utilization and increases LCOTS by 125%. Overall, no single configuration performs best across efficiency, coverage, and cost. Among the configurations that improve all evaluated performance indicators relative to the reference case, t6.0_V24000_h5.6_HP400 achieves the highest combined relative improvement and is therefore identified as the most promising configuration under the investigated conditions, increasing storage efficiency by 17%, heating and cooling coverage by 58% and 34%, respectively, while reducing LCOTS by 5%. The identified design trends provide guidance for sTES design in similar TSNs under comparable operating conditions and within the investigated parameter ranges.