
Rapid efficiency gains in laboratory‐scale perovskite photovoltaics have not translated into reproducible, scalable manufacturing because of persistent scientific, experimental, and process‐level barriers. Existing reviews cover machine learning and AI in materials screening, property prediction, and self‐driving laboratories, but links between laboratory demonstrations and prospectively validated, manufacturing‐relevant systems remain unresolved. This review examines five bottlenecks: new‐material discovery, device efficiency, operational stability, reproducibility and knowledge transfer, and scalable manufacturing, using evidence beyond retrospective accuracy and champion‐device efficiency, including experimental realization, uncertainty, independent batches, spatial uniformity, process‐window robustness, module yield, and durability. The review proposes an operational, falsifiable Fifth‐Paradigm framework defined by five attributes: closed‐loop experimental agency, material‐to‐manufacturing lifecycle integration, bidirectional physical‐digital synchronization, provenance‐aware data infrastructure, and validated transferable or distributed learning across domains. Each attribute is necessary but individually insufficient; ecosystem‐level status requires coordinated, prospectively validated evidence across all five. Generative modeling, autonomous experimentation, digital twins, and distributed learning are enabling mechanisms rather than indicators of a distinct paradigm. Current platforms demonstrate laboratory automation and closed‐loop optimization, but material‐device autonomy remains in its early stages, and a cross‐site discovery ecosystem has not yet been demonstrated. Distinction from Fourth‐Paradigm workflows requires measurable gains in prospective validation, reproducibility, cross‐domain transfer, and manufacturing‐relevant decision‐making.
The electrochemical behavior of polycrystalline titanium (Ti) is important for applications in defense, energy, and biomedicine, yet the factors governing local electron transfer activity remain poorly understood. Here, voltammetric scanning electrochemical cell microscopy (SECCM) employing a 500 nm nanopipette was used to investigate the [Fe(CN)6]3−/4− redox reaction on passive Ti surfaces. Spatially resolved linear sweep voltammograms were correlated with colocated scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, and electron backscatter diffraction analyses. Three surface preparation methods—electropolishing, ion beam milling (IBM), and HF chemical etching—were examined to evaluate the influence of surface morphology and interface chemistry on electron transfer kinetics. In contrast to microscale measurements, nanoscale SECCM resolved local electrochemical heterogeneity across the Ti surface. No clear correlation was observed between electron transfer kinetics and grain orientation or grain boundaries, indicating that the ambient‐formed TiOx passive film largely masks microstructural effects. Electropolished and IBM‐treated surfaces exhibited similar electrochemical behavior, whereas HF‐etched Ti showed substantially more negative half‐wave potentials and broader activity distributions, consistent with a more heterogeneous and electronically blocking passive surface. These findings highlight the dominant influence of surface preparation on the electrochemical properties of ambient‐formed TiOx films.
This work presents a comprehensive computational investigation of a novel two‐dimensional (2D) organic carbon nitride (C 5 N) monolayer for hydrogen (H 2 ) storage applications. Van der Waals‐corrected density functional theory calculations reveal that pristine C 5 N interacts weakly with H 2 molecules, thereby limiting its storage capability. To address this limitation, the C 5 N monolayer is functionalized with light alkali metals M (M = Li, Na, and K) to enhance its adsorption performance. Energetic analysis demonstrates that C 5 N can stably accommodate up to six metal dopants, with average binding energies of −2.88, −1.84, and −1.80 eV per dopant for Li, Na, and K, respectively. These values are significantly stronger than the corresponding cohesive energies of the dopants, thus preventing metal aggregation. The thermal stability of the functionalized systems is confirmed through ab initio molecular dynamics simulations at 300 K. Electronic structure and charge analysis, based on projected density of states and Bader charge calculations, indicate charge transfer values of 0.99, 0.99, and 0.85 electrons per dopant from Li, Na, and K to the C 5 N monolayer, respectively. This charge transfer leads to enhanced polarization, reduced bandgap, and improved H 2 adsorption performance. Each metal dopant can adsorb up to eight H 2 molecules, leading to a maximum storage capacity of 48 H 2 molecules per unit cell. The corresponding gravimetric densities are 9.42, 8.61, and 7.93 wt% for the Li‐, Na‐, and K‐functionalized C 5 N systems, respectively, with moderate average adsorption energies (−0.16 to −0.17 eV/H 2 ) that are suitable for reversible H 2 storage. Thermodynamic analysis under practical fuel‐cell operating temperature and pressure conditions further confirms the favorable H 2 adsorption/desorption behavior of the functionalized C 5 N systems. The reversibility of the designed materials is evaluated through desorption temperature and recovery time calculations, indicating efficient H 2 release kinetics. In addition, volumetric storage performance is assessed through density‐to‐volume ratio analysis. Overall, these results highlight alkali metal‐functionalized C 5 N monolayers as promising candidates for efficient and reversible H 2 storage applications.
This work presents a comprehensive computational investigation of a novel two‐dimensional (2D) organic carbon nitride (C5N) monolayer for hydrogen (H2) storage applications. Van der Waals‐corrected density functional theory calculations reveal that pristine C5N interacts weakly with H2 molecules, thereby limiting its storage capability. To address this limitation, the C5N monolayer is functionalized with light alkali metals M (M = Li, Na, and K) to enhance its adsorption performance. Energetic analysis demonstrates that C5N can stably accommodate up to six metal dopants, with average binding energies of −2.88, −1.84, and −1.80 eV per dopant for Li, Na, and K, respectively. These values are significantly stronger than the corresponding cohesive energies of the dopants, thus preventing metal aggregation. The thermal stability of the functionalized systems is confirmed through ab initio molecular dynamics simulations at 300 K. Electronic structure and charge analysis, based on projected density of states and Bader charge calculations, indicate charge transfer values of 0.99, 0.99, and 0.85 electrons per dopant from Li, Na, and K to the C5N monolayer, respectively. This charge transfer leads to enhanced polarization, reduced bandgap, and improved H2 adsorption performance. Each metal dopant can adsorb up to eight H2 molecules, leading to a maximum storage capacity of 48 H2 molecules per unit cell. The corresponding gravimetric densities are 9.42, 8.61, and 7.93 wt% for the Li‐, Na‐, and K‐functionalized C5N systems, respectively, with moderate average adsorption energies (−0.16 to −0.17 eV/H2) that are suitable for reversible H2 storage. Thermodynamic analysis under practical fuel‐cell operating temperature and pressure conditions further confirms the favorable H2 adsorption/desorption behavior of the functionalized C5N systems. The reversibility of the designed materials is evaluated through desorption temperature and recovery time calculations, indicating efficient H2 release kinetics. In addition, volumetric storage performance is assessed through density‐to‐volume ratio analysis. Overall, these results highlight alkali metal‐functionalized C5N monolayers as promising candidates for efficient and reversible H2 storage applications.
The development of sustainable and high‐performance electrochemical energy‐storage systems requires electrode materials capable of combining fast charge transfer, high power capability and long‐term stability. In this context, pseudocapacitive transition metal oxides have attracted increasing attention due to their ability to bridge the gap between conventional capacitors and batteries. Herein, a sustainable surface‐engineering strategy is proposed to enhance the pseudocapacitive response of hexagonal WO 3 nanoparticles through in situ functionalization with N‐ and S‐containing species during a simple aqueous hydrothermal synthesis. The introduced surface functionalities improve the electrochemical performance without altering the bulk crystal structure or morphology of WO 3 . In particular, the functionalized materials exhibit enhanced specific capacitance, improved coulombic efficiency, and remarkable cycling stability over 10,000 cycles, with S‐functionalized WO 3 showing the best overall response. Spectroscopic analyses suggest that surface electronic modulation and more favorable interfacial charge–transfer processes contribute to the improved pseudocapacitive behavior. Moreover, the exclusive use of aqueous synthesis, water‐based electrode processing, and aqueous electrolytes provides a greener route toward electrode fabrication. These findings highlight surface functionalization as a promising and sustainable strategy for tuning the interfacial properties of WO 3 ‐based electrodes for next‐generation energy‐storage technologies.