
In this study, the vibration and stability analysis of functionally graded (FG) doubly curved panels reinforced with nano-graphene platelets (NGPLs) embedded by piezoelectric layers under the influence of aeroelastic force are investigated. Multilayer sandwich doubly curved panel makes of porous materials reinforced with nano-graphene platelets are considered. The NGPLs are assumed to be uniform and non-uniform distribution, as well as three types of targeted porosity distribution that change continuously along the thickness in each layer. This structure is always under influence of external fluid flow and modeled by the piston theory. Based on the higher-order shear deformation theory, the governing equations of motion of doubly curved panels reinforced with NGPL are obtained using extended Hamilton’s principle. Galerkin method is employed to transform the partial differential equations of motion into the ordinary equations. The effect of advanced materials including various patterns of porosity distribution, porosity coefficients, distribution or dispersion of nano graphene platelets, NGPL weight fraction, as well as the effect of structural geometric dimensions on vibrations and dynamic instabilities of structures are studied.
A fuel cell is an electro-chemical tool capable of converting chemical energy into electrical energy. The high operating temperature of the solid oxide fuel cell (SOFC), (between 700oC to 1000oC), causes thermal stress which is the origin of crack initiation and propagation. Thermal stress causes gas escape, structure variability and SOFC operation cessation before its lifetime. The purpose of the current paper is to present a method that predicts the thermal stress distribution and forecasts the beginning of fissure or crack occurrences in an anisotropic porous electrode of the planar SOFC. The governing coupled non-linear differential equations of heat transfer, fluid flow, mass transfer, mass continuity, and momentum are solved numerically. A code based on computational fluid dynamics (CFD), computational structural mechanics and finite element method (FEM) is developed and utilized. The results show that the highest thermal stress occurs at the lower corners of anode and the upper corners of cathode. The cathode’s thickness at the left side increases by 1.5% and the concentrated temperature and thus the fissure occurs between the top and bottom left corners of the cathode.
In this paper, an integrated controller including the anti-lock braking system along with an active suspension is designed for a quarter car model, on the basis of the improved sliding mode control algorithm. Dynamical model of the active suspension along with the anti-lock braking system are derived using the Newton-Euler equations. Also, in order to model the friction between the tire and the road surface, the Pacejka model is used. The application of the control algorithm for the ABS yields a higher safety rate for the vehicles. On the other hand, the active suspension system beside the anti-lock braking system can improve the car safety and passenger comfort. To increase the friction between tire and the road surface, the active suspension system increases the normal force over the tire. Consequently, the performance of the braking system is improved with decreasing the stopping distance. In order to design the hybrid control system, the sliding mode control (SMC) system and proportional-integral-derivative (PID) controller are merged. In the PID-SMC strategy, the sliding surface is defined based on the PID algorithm. This novel control algorithm can decrease the chattering phenomenon besides shortening the stopping distance that yields the reduction of energy consumption.
In this paper, a non-dimensional analysis approach has been used to propose two empirical equations based on dimensionless numbers to predict the maximum transverse permanent deflection-thickness ratio of single-layered quadrangular plates under uniformly and locally distributed dynamic loading. In the presented dimensionless numbers, the effect of plate geometry, the impulse of the applied load, the mechanical properties of the plate, the strain-rate sensitivity, and the loading radius have been considered. To validate the empirical models, eight series of conducted experiments and 267 data points in the state of the art over the past forty years have been used. The obtained results show good agreement between the model prediction results and the experimental values so that in the total of 117 experimental data for uniform loading, 94% (110 data) and 98% (115 data) of the data points were distributed in the ±10% and ±20% error range, respectively. Besides, in the total of 150 experimental data for localized loading, 83% (124 data) and 97% (146 data) of data points were distributed in these two ranges, respectively. The results also showed that assuming the material constants as variables based on the plate thickness, in the Cooper-Symonds constitutive equation improves the prediction accuracy of the empirical models so that only 6% and 12% of the data for uniform and localized loading respectively, are not within the 10% error range.
Magnetic levitation systems (Maglev) are widely used in various industries. The open loop Maglev system is highly nonlinear and unstable. Therefore, designing a simple, but effective controller for such a system is a challenging issue. In this paper, a fractional order predictive functional controller (FPFC) is proposed for the control of the magnetic levitation system based on its linearized unstable model. At first, the unstable plant is decomposed into two stable models. Then, using these two stable models and employing fractional order cost function, the PFC controller is designed. Because of more degrees of freedom and its flexibility of fractional order calculus, the proposed fractional PFC would improve the performance of closed loop systems, noticeably. Robust stability of closed-loop systems has also been studied considering the uncertainties and model mismatches via the small gain theorem. Simulation results show good performance of the proposed controller in nominal and perturbed conditions. Based on provided simulations, via the proposed controller, overshoot has been omitted and performance indices have been improved more than 50% with respect to the first and second orderof freedom integer/fractional order PID controllers, designed for this system, in the literature.