
Cross-laminated timber (CLT) is one of the most advanced and innovative wood-based construction products of the latest decades. Research on this product is still ongoing, and various institutions, companies, and scientists are making new contributions in this field. The present paper is part of the trend of finding new elements that will lead to the expansion of the market and the continued use of this product. The paper provides a synthesis of research in the CLT field, taking into account a series of aspects related to the working technique, wood species and materials often used, as well as their main physical and mechanical properties. Also, some standardisation elements and good practice guidelines are highlighted, without forgetting the assembly part with own joints or specific metal connectors. The main applications of CLT in the construction of multi-story houses based on wood are also emphasised, including floors and ceilings, side and intermediate walls, and even in roofs. Furthermore, the paper discusses some elements of challenges and limitations, recent innovations and current trends, and especially elements of sustainability and life cycle assessment of the global circular economy. The final conclusion of the study is that this product is still in its early stages that coming years will benefit from the construction of light, ecological houses using wood materials such as the CLT structural composite.
The weight loss behaviour of Kelempayan (Neolamarckia cadamba) wood particles that have undergone alkaline chemical alteration is examined in this work. Two particle sizes (0.5 mm and 1.0 mm) were treated with sodium hydroxide (NaOH) solutions at concentrations of 0.5, 1, and 2% for 60 minutes at 30 and 90°C. Particle mass measurements obtained before and after treatment were used to calculate weight reduction. The results showed that the weight loss of the samples was significantly influenced by temperature, NaOH concentration, and particle size (p < 0.05), with smaller particles treated at higher NaOH concentrations experiencing the highest weight losses. Temperature had no significant effect on weight loss, although slightly higher weight loss was observed at 90°C. The particle size and weight loss of the samples showed a strong negative correlation (r = -0.96) according to statistical analysis, indicating that smaller particles are more vulnerable to alkaline degradation because of their larger surface area-to-volume ratio. 0.5 mm particles treated with 2% NaOH at 90°C showed the greatest weight loss (21.00%), whereas 1.0 mm particles treated with 0.5% NaOH at 30°C showed the least weight loss (9.33%). These results emphasise how crucial it is to optimize alkaline treatment conditions to balance minimal material loss with efficient hemicellulose, lignin, and extractive removal. This work establishes distinct correlations between temperature, NaOH concentration, and particle size, offering quantitative insight into the degrading behaviour of Kelempayan under various processing settings. These results provide useful recommendations for enhancing the performance consistency of particleboard and other wood-based composites and for optimising raw material treatment.
Noise and vibration generated by woodworking power tools constitute significant occupational hazards in small- and medium-scale workshops. This study quantified the influence of wood moisture content on noise and vibration emissions during machining under controlled conditions. Representative softwood and hardwood species were processed using common woodworking machines under nominal low- and high-moisture conditions (approximately 20 and 80% MC), verified by oven-dry measurements. At 20% moisture, production noise reached 110.1-113.9 dBA for table saw operations and 101.6-109.7 dBA for band sawing and surface planning, while corresponding values at 80% moisture decreased by approximately 4-11 dBA. Machine-level vibration magnitudes ranged from 2.1-3.0 m/s² at 20% moisture and reduced to 0.7-1.0 m/s² at 80% moisture, with operator-position vibration decreasing from 0.6-1.1 m/s² to 0.1-0.3 m/s². One-way ANOVA confirmed that moisture content significantly affected both noise and vibration emissions (p < 0.05). The regression analysis further demonstrated a bounded linear approximation of the directional change in emission magnitude between the two moisture states (20 and 80%), representing a simplified expression of the rate of change within the experimental range. Despite these reductions, exposure levels frequently exceeded occupational thresholds, indicating that moisture control should complement integrated mitigation strategies rather than serve as a standalone solution.
This study aimed to design and develop an elderly-friendly smart bed using the Quality Function Deployment (QFD) methodology to systematically translate user needs into technical design specifications. Data were collected from elderly users through interviews and questionnaires to identify customer requirements related to functionality, safety, materials, usability, and intelligent systems. The collected data were analysed using the Product Planning Matrix and the Design Deployment Matrix within the House of Quality framework. The results identified several critical technical requirements, particularly intelligent safety systems, smart convenience features, structural durability, and material quality. Based on these findings, an elderly-friendly smart bed prototype was developed using kiln-dried and chemically treated rubberwood integrated with assistive intelligent systems. The product evaluation indicated a high level of user satisfaction, with an overall mean satisfaction score of 4.29 out of 5.00. The highest-rated features included smart convenience functions, protective corner padding, intelligent safety systems, and structural stability. The findings suggest that QFD provides an effective framework for translating elderly user requirements into practical design solutions. This study contributes to elderly-friendly smart furniture development by integrating safety, assistive technology, and sustainable material considerations into a unified product design framework.
In this study, a protocol was developed for the in vitro propagation of Quercus pubescens Willd. Through this research, we aimed to determine how in vitro cultivation conditions, culture medium, and the sterilisation method influence in vitro regeneration response. Explants aseptically disinfected in sodium hypochlorite solution, Benzalkonium chloride, and ethanol were inoculated onto two types of medium (WPM and GD), to which different combinations of plant growth regulators were added. Sterilisation treatment consisting of benzalkonium chloride 1%, 3 minutes + Domestos 20%, 3 minutes + Ethanol 70%, 1 minute led to cultures free of microbial contamination and the highest percentage of viable explants (80%). After one month from the initiation of the cultures, measurements were made regarding microshoot height, number, and length of the leaves. The WPM medium with gibberellin 0.25 mg/l and BAP 1 mg/l positively influenced the growth of microshoots and leaf size, leading to the best results in terms of shoot height (3.27 cm) and leaf length (0.62 cm). On the GD medium, the number of leaves was slightly higher (2.82), but their length was shorter (0.52 cm). The rooted microshoots were acclimatised in the greenhouse, and the survival rate was 84.62%.