
Due to the short duration and high amplitude characteristics of impulsive noise, these parameter estimation methods based on Gaussian assumptions are ineffective in the presence of impulsive noise. To address this issue, a LFM signal parameter estimation method is proposed based on FOTD and CFRFT. Firstly, the mathematical expression of FOTD is presented and its tracking performance is verified. Secondly, the tracked signal is subjected to discrete time CFRFT, and a mathematical optimization model for LFM signal parameter estimation is established on the fractional spectrum characteristic. Finally, a correction method for non-standard SαS distributed noise is proposed, and the performance of parameter estimation under both standard and non-standard SαS distributions are analyzed. The simulation results show that this method not only effectively suppresses the impact of impulsive noise on the fractional spectrum of LFM signal, but also has better parameter estimation accuracy and stability in the low GSNR. The proposed method is particularly effective under the measured noise environment, as it successfully suppresses the impact of impulsive noise and achieves high-precision parameter estimation.
In response to the issue of particle depletion caused by resampling in standard particle filters, which affects the accuracy of tracking systems, an improved target tracking method using the Cuckoo Search Algorithm for particle filter optimization is proposed. In this approach, particles are treated as host nests for cuckoos, simulating the behaviour of cuckoos searching for host nest locations. This process involves two phases: global search and local search, which guide particles to move towards high-likelihood regions. Furthermore, enhancements are made to the optimization mechanism of the Cuckoo Search Algorithm by introducing an improved method for dynamic global search step size. This improvement strengthens the algorithm's convergence speed and achieves improved tracking performance with fewer iterations and particles. Finally, simulations are conducted for tracking dynamic targets in one-dimensional space. The simulation results confirm that the enhanced algorithm indeed improves the accuracy of the tracking system for dynamic targets.
Many images exhibit non-modal, unimodal, bimodal, or multimodal gray level distributions. Current thresholding methods often struggle with images whose gray level distributions do not conform to a bimodal or unimodal pattern. We propose a novel bi-level threshold selection technique guided by maximizing Pearson correlation, addressing these four distribution types within a unified framework. Our method entails a multiscale multiplicative transformation of the image to create a template, extracting contours from binary images at different thresholds, and using Pearson correlation to assess the similarity between these contours and the template. The threshold with the highest similarity is chosen as the final threshold. Tested against seven methods on 20 synthetic images and 50 real-world images with non-modal, unimodal, bimodal or multimodal distribution patterns, our method showed more flexible adaptability of threshold selection and lower misclassification error, although it did not exhibit an advantage in computational efficiency.
The accurate measurement of the ground capacitance is helpful to ensure the compensation effect of the arc suppression coil. To improve the accuracy of measurement, a unified measurement method for ground capacitance and arc suppression coil inductance based on signal injection method and fast Fourier transform (FFT) is proposed. Firstly, the relationship between the neutral voltage and the system parameters is established. Secondly, current at a specific frequency is injected into the neutral point, and the neutral voltage component at the specific frequency is obtained by FFT to eliminate the power frequency error. Then the unified measurement is realized according to the equivalent circuit. Finally, the proposed method is tested by the MATLAB/Simulink, which shows that this method is suitable for various types of arc suppression coils. In the three-phase asymmetry condition, the maximum errors of ground capacitance and arc suppression coil inductance are 0.1% and 0.11% respectively, and the maximum errors are 1.3% and 1.8% respectively in three-phase symmetry condition.
In this paper, aiming at the scenario of the multi-target formation attacks the multi-station radar (MSR) system, a robust jamming beam selection and power scheduling (RJBSPS) strategy is proposed for cooperatively suppressing the MSR system. The purpose of the RJBSPS strategy is to maximize the cooperative jamming performance of the multi-jammer system by optimizing the limited jamming resources. In the jamming environment, the information reduction factor-based posterior Cramér-Rao lower bound (PCRLB) provides a lower bound on the accuracy of target state estimation, the sum of the PCRLBs for multiple targets is adopted to evaluate the cooperative jamming performance of the multi-jammer system to the MSR system. In addition, the generalization error caused by the uncertainty of the MSR system parameter estimation is considered and combined with the resource optimization model. The formulated RJBSPS strategy, while subject to the limited jamming resource, is non-convex due to the coupled parameters. Thus, based on the particle swarm optimization (PSO), a two-step decomposition method is proposed. The simulation results show the effectiveness and robustness of the proposed robust resource scheduling strategy in degrading the multi-target tracking performance of the MSR system.