
Long-distance pressurized water pipelines are prone to water hammer effects during valve opening and closing,which poses a threat to the safe operation of the pipeline.a water conveyance project is focused on from a certain reservoir,addressing the challenges of water hammer protection in long-distance and high-head water supply networks.The characteristic line method is used to construct a simulation model of the hydraulic transition process.After designing a tiered pressure relief pool,the impact of different valve opening and closing times on water hammer in the water conveyance system is calculated.Based on this,a"pressure relief pool+air valve"collaborative protection strategy is proposed.The research results indicate that implementing a two-stage pressure relief pool can effectively control the over pressure along the water conveyance system.Additionally,using air valves in conjunction with valve opening and closing can effectively improve the internal water pressure distribution along the water conveyance system without af-fecting its response speed.
To address issues such as nonlinearity and time-variation in the power control of variable-speed pumped storage units,an adaptive power control method based on BP neural networks is proposed.By establishing a simpli-fied mathematical model of the variable-speed pumped storage system,a 3-5-1 feedforward neural network controller with online learning capability is designed.This controller uses the error backpropagation algorithm to adjust network weights in real time.Matlab/Simulink simulation results show that,compared to the traditional PI controller,the BP neural network controller exhibits near-zero overshoot,small steady-state error,and smooth,oscillation-free response during step response.
On the premise of ensuring route safety, an intelligent route planning algorithm based on multi-strategy particle swarm optimization is proposed with the lowest energy consumption as the goal. The energy consumption model is established based on airline meteorological information, and a multi-objective fitness function is constructed with energy consumption, airline smoothness and collision penalty as optimization objectives. An adaptive mean velocity updating strategy is proposed, and nonlinear inertia weight is introduced, and Tent chaotic mapping is adopted to dynamically adjust the development ability and exploration ability of the algorithm to avoid falling into local optimal solution. The strategy of updating the position of the worst particle is put forward, and the particles with the worst fitness are updated by coordinate cross, which improves the overall particle quality of the population and speeds up the efficiency of population optimization. The simulation results show that the improved multi-strategy particle swarm optimization algorithm is superior to PSO algorithm in optimization ability and convergence speed.
To improve the compensation performance of Active Power Filter (APF), this paper proposes a three-level APF controller based on dual DSP, which improves resource allocation. The main DSP is responsible for load current sampling, compensation current sampling, DC side voltage sampling, harmonic and reactive compensation current extraction, current tracking control calculation, PWM wave modulation, and other tasks, while the auxiliary DSP is responsible for sharing some operations and signal sampling, Including harmonic calculation, grid voltage sampling, touch screen display, power outage data storage, etc., communication between the two DSP is achieved through dual port random access memory RAM; More reasonable allocation of software tasks has improved the parallel computing ability of dual DSP. And it has been verified in a three-level APF prototype that it can achieve a switching frequency of 20 kHz, reduce the grid current distortion rate from 15 to 2%, and achieve a harmonic filtering rate of 86.7%, demonstrating good harmonic filtering ability.
The fiber optic temperature measurement host utilizes the principle of Raman scattering of light waves to monitor the temperature of the environment in real-time. Due to the extremely harsh working environment in mines, optical fibers are prone to compression deformation caused by foreign objects (falling coal blocks, mechanical equipment) after long-distance laying, leading to abnormal transmission of light waves and issuing invalid alarm signals. Invalid alarm signals can greatly interfere with the reliability and stability of coal mine safety monitoring systems, causing great difficulties to production operations. On the basis of in-depth analysis of the principle of Raman scattering of optical waves in temperature measurement hosts, this article proposes a segmented filtering model for fiber optic abnormal force signal temperature measurement band based on nonlinear polynomials. Through experimental analysis, it has been proven that the model can prepare to identify abnormal data generated by non environmental temperature effects in the optical path, greatly improving the reliability and effectiveness of the fiber optic temperature measurement host.