
Drying-induced cracking is a common phenomenon in near-surface geomaterials subjected to environmental humidity fluctuations, significantly affecting their hydraulic, mechanical, and durability properties. This study develops a coupled humidity diffusion–shrinkage stress–damage framework (RFPA-Humid) for simulating drying-induced cracking in layered hygroscopic geomaterials by integrating moisture diffusion, material heterogeneity, and progressive damage. Parametric analyses revealed that thinner surface layers produced higher crack densities and smaller polygonal units, higher moisture diffusion coefficients accelerated damage accumulation and crack propagation, and greater material homogeneity promoted the formation of more regular polygonal crack networks. A critical moisture diffusion threshold marking the onset of sustained micro-damage and macroscopic cracking was identified. Quantitative validation against published experimental data demonstrated that the model accurately reproduced the dependence of crack characteristics on surface layer thickness and the evolution of both vertical surface cracks and horizontal interfacial damage. Applicable to humidity-driven shrinkage cracking in layered hygroscopic materials under isothermal drying conditions, the proposed framework provides a quantitative tool for investigating drying-induced damage in earthen structures, surface soils, slopes, and cultural heritage materials.
This study delves into the early warning system for regional rainfall-induced landslide hazards. By integrating landslide susceptibility mapping and critical rainfall thresholds, a spatiotemporal probabilistic prediction framework for landslide hazards is established. Taking Wushan County as the study area, the authors utilised 313 recorded rainfall-triggered landslide events and meteorological rainfall data spanning from 2010 to 2024. Initially, a landslide susceptibility prediction model was constructed using the Random Forest algorithm, with model accuracy validated by the area under the curve (AUC) metric (AUC = 0.85). Subsequently, critical rainfall thresholds were determined through a comprehensive analysis of antecedent effective rainfall, employing three models: effective rainfall intensity-duration (EI-D), cumulative effective rainfall-duration (EE-D), and cumulative effective rainfall-effective rainfall intensity (EE-EI). Finally, a landslide hazard warning map was generated by spatially superimposing susceptibility classifications and rainfall threshold exceedance probabilities, accompanied by corresponding disaster prevention strategies. The results demonstrate that this integrated methodology enhances the precision of regional landslide early warnings, as supported by quantitative validation metrics (probability of detection = 0.76, true skill statistic = 0.44), providing a scientifically robust decision making framework for natural resource management authorities in disaster risk mitigation.
To investigate the microscopic damage mechanism of soil property deterioration under freeze-thaw cycles, a discrete element method (DEM)-based approach using water particle expansion to simulate freeze-thaw damage in soil is proposed. The stress–strain curves obtained from uniaxial compression tests are used to calibrate the microscopic parameters of geopolymer-stabilised soil under different numbers of freeze-thaw cycles. Uniaxial compression simulations are then conducted on the freeze-thaw damaged stabilised soil model, revealing the evolution of microcracks, displacement fields, and force chain fields, as well as the fracture characteristics of freeze-thaw stabilised soil under loading. The results indicate that (1) the stress–strain curve obtained by discrete element simulation is in good agreement with the experimental compressive strength. (2) As the number of cycles increases, the damage evolution of the soil exhibits distinct stages: initial emergence of localised damage zones; microcrack propagation and coalescence with enhanced localisation of displacement fields; and a damage saturation stage in which the soil approaches a critical state. (3) The contact force chain evolves in a pattern of ‘disordered-concentrated-dispersed-reconcentrated’ with freeze-thaw damage, whereas the pore structure undergoes an adjustment process of ‘isolated-locally connected-interconnected – stabilised by fine particle filling’.
Hydraulic fracturing in anisotropic poroelastic media involves strongly coupled deformation, pore-pressure diffusion, and crack growth, all of which are direction dependent. Although phase-field methods have advanced hydraulic-fracture simulation, their application to anisotropic reservoirs remains limited. This study proposes a thermodynamically consistent hydro-mechanical phase-field formulation for hydraulic fracturing in anisotropic porous media. The model combines anisotropic Helmholtz free energy with an energy-orthogonal volumetric-deviatoric split to describe tension-compression asymmetric degradation in anisotropic solids. Directional fracture resistance is represented by an anisotropic crack-surface density functional, while fluid pressure is governed by anisotropic Biot poroelasticity with damage-dependent Darcy flow. A bounded non-linear solution scheme enforces the physical bounds and irreversibility of the phase-field variable. Numerical examples verify the isotropic limit against the toughness-dominated Khristianovich-Geertsma-de Klerk and penny-shaped hydraulic crack solution and demonstrate anisotropy-driven fracture deflection, orientation-dependent pressure evolution, and directionally controlled crack patterns. Simulation results indicate that the present model can simulate hydraulic-fracture growth in both two- and three-dimensional anisotropic porous media, including anisotropy-driven fracture deflection and direction-dependent pressure evolution.