
Cranberry(Oxycoccos)has strong cold resistance,and its fruit has high health value and economic value.In this stud-y,the tissue cultured seedlings of cranberry were used as cuttings to explore the soaking and quick dipping tests of cranberry cuttings under different indole-3-acetic acid(IAA),1-naphthlcetic acid(NAA)and 3-indolebutyric acid(IBA)concentrations,and the effects of different hormone types and concentrations on rooting rate,seedling height growth,biomass and root growth characteristics(including the longest root length,root surface area,average root diameter and average root number).The results showed that,when NAA soaking treatment was 100 and 200 mg/L,the root system grew well,but the longest root length was only(30.77±0.18)cm(NAA 100 mg/L),and the average root diameter was(0.3±0.02)mm.However,the longest root length of cuttings treated with IBA 1000 mg/L per hour was(30.13±3.22)cm,the average root diameter was(0.39±0.04)mm,the root surface area was(1.27±0.01)cm2,and the average number of roots was(128.22±2.38).From this point of view,there was little difference in root growth between the soaking treatment and the rapid soaking treatment,but in general,when the IBA concentration was 1000 mg/L,the rooting rate,was 85% at the highest.Therefore,the quick dipping method was more suitable for the rooting of cranberry tissue culture seed-lings.In this study,the cutting propagation technology of tissue culture seedlings of cranberry was established for the first time,which laid the foundation for large-scale propagation of cranberry.
In response to the slow processing speed and low reconstruction accuracy encountered during the 3D reconstruction of trees,a method for 3D reconstruction of single-tree skeletons using laser point cloud data is proposed.Firstly,a combination filtering method is determined based on the point cloud data type to remove outliers and ground points.Secondly,a hybrid registration algorithm based on ISS(Intrinsic Shape Descriptor)and CPD(Coherent Point Drift algorithm),called IS-CPD(Intrinsic Shape-Coherent Point Drift),is employed to obtain complete point cloud data for individual trees.Finally,a method combining Laplace contraction of point sets and topological refinement is used to obtain the skeleton,and branch models are constructed using cylinders to achieve 3D skeleton reconstruction.Experimental results show that compared to traditional CPD algorithm,the proposed registration scheme im-proves accuracy and execution speed by 50% and 95.8% respectively,with a final reconstruction error of no more than 2.48%.The research demonstrates the effective reconstruction of the 3D skeleton of individual trees,with results close to the original trees,provi-ding a reference for building digital twin environments of forest trees and forestry resource management.
Aiming at the problems of low milling efficiency,low machining precision and high manual labor intensity of the outer frame of passive European-style wood windows,a double end milling machining center for passive European-style wood windows was designed and used for high-efficiency and high-precision milling of the outer frame of passive European-style wood windows.Through the analysis of the milling process of wood windows,the detailed design of the machining center structure was carried out using comput-er-aided design methods.Solidworks software was used for three-dimensional modeling of the machining center,and finite element a-nalysis software was used to analyze the strength and stiffness of the key support parts.Virtual experimental methods was used to verify the machining efficiency of the machining center.The results showed that the theoretical machining efficiency of the machining center was about 400 fans/day,compared with the manual machining efficiency of 350 fans/day,the efficiency was improved by 14.28%,and the maximum stress of the key support parts was far less than the permissible stress of the material,which met the requirements for use.
To investigate the microbial diversity and the main pathogenic microorganisms of Fraxinus mandshurica leaves with dif-ferent degrees of brown spot disease,and to analyze the control methods to maintain the ecological safety and enhance the economic benefits of Fraxinus mandshurica plantation forests,leaves infected with brown spot disease to varying degrees at Maoershan Experimen-tal Forest Farm were collected,and the microbial community structure and species composition of Fraxinus mandshurica leaves were de-termined and analyzed using high-throughput sequencing technology.A total of 1 026 fungal operational taxonomic units(OUT)and 322 bacterial OUTs were obtained before and after the disease in the three groups of samples.Among the bacteria,the phyla Proteobac-teria and Actinobacteriota were the dominant phyla;the genera Sphingomonas,Acidibacter and Bradyrhizobium were the main dominant genera.Among the fungi,the phyla Ascomycota and Basidiomycota were the dominant phyla;the genera Vishniacozyma,Septoria,and Hannaella were the dominant genera.There were no significant differences in bacterial diversity and community structure among the three groups of samples,and significant differences in fungal diversity and community structure.It was preliminarily speculated that the Cercospora was a pathogenic bacterium,but its pathogenicity needed further study.
In order to meet the needs of European wood windows customized size change,a size adaptive positioning clamping de-vice was designed,and the finite element software was used to carry out static analysis of the clamping process of wood windows,ensu-ring that the elastic deformation of wooden windows was within a reasonable range while meeting the clamping requirements.At the same time,in order to meet the lightweight design requirements,the topology optimization design of the press roller connecting frame was carried out.The structure of the press roller connecting frame was improved according to the topology optimization results,and the static analysis and verification of the optimized model were carried out,and the optimized workpiece was finally obtained.The results showed that the weight of the press roller connecting frame decreased obviously after optimization,which meets the relevant requirements.