
While evaluating Ship-radiated noise with operational transfer path analysis (OTPA), a question arises that the input of OTPA cannot meet the linear system requirement, which results in a large estimated error in several frequencies. Therefore, to reduce the estimated error, in this paper a method based on OTPA optimized by operation clustering is proposed. First, a complete clustering feature matrix is constructed and weighted principal component analysis (W-PCA) used for feature extraction. Then, several classes of operating mode(OM) are clustered by K-means based on the feature, and the classified OMs are taken as the input of OTPA, which can meet the linear system requirement of OTPA. Experiments with cabin in Thousand Islet Lake show that the statistical probability of the line spectrum with an estimated error less than 3 dB is more than 95%, which is an improvement of 16.7% compared to the error before optimization, and the maximum estimated error of the line spectrum is reduced by 11.3 dB. The estimated error of 1/3 Octave is less than 2 dB in all frequencies, which can be reduced by approximately 7 dB. The results verify the feasibility of OTPA optimized by operation clustering.
Most of the methods for extracting underwater acoustic beaconing signal are currently suitable for a good hydrological environment. Aiming at the problem of longrange detection of acoustic beaconing signal in harsh environments such as platform movement and serious transient noise interference, a method combined "matched filtering with Doppler filter bank, adaptive line enhancement based on variable step frequency-domain least mean square (LMS) algorithm and Zoom-FFT" is proposed. Verification test of the proposed method is carried out on the lake. The results of data processing show that this method could reduce the Doppler sensitivity and suppress the transient interference. Meanwhile, the output signal-to-noise ratio (SNR) and frequency resolution are improved, which provides an excellent signal environment for the back-end acoustic beacon positioning.
Outputting the acoustic field pressure and particle velocity at the same time and at the same point, a single hydrophone can be used to estimate the direction of arrival (DOA) of the target. It has received extensive attention internationally. The DOA estimation methods of single vector hydrophone can be divided into two categories. One is the maximum likelihood estimation method based on acoustic energy flow, representative algorithms including acoustic intensity averager and histogram method; the other is based on the characteristics of the vector hydrophone array flow, and apply high-resolution algorithms commonly used in array signal processing to single vector hydrophones. These high- resolution algorithms include Minimum Variance Distortionless Response (MVDR), Multiple Signal Classfication (MUSIC), and Estimating Signal Parameter via Rotational Invariance Techniques (ESPRIT). The resolution of the MVDR is not as good as the MUSIC and the ESPRIT, but the quantity of computation is much smaller than the latter. Aiming at the problem of wide output spatial energy spectrum peak and poor spatial resolution of the MVDR, this paper proposes a highresolution DOA estimation method for single-vector hydrophones based on the theory of the optimal preselected filter--ECKART filter. This method can significantly improve the spatial resolution and output signal-to-noise ratio (SNR) of the MVDR algorithm based on single-vector hydrophone.
In order to effectively separate multiple target signals and reduce noise interference to underwater target signals, the frequency-wavenumber(f-k) filtering method commonly used in the seismic data processing was applied to the separation of underwater multi-target signals and the denoising processing of underwater acoustic data. By analyzing the f-k spectrum of multi-target underwater acoustic data, the parameters of the sector-filter were designed, then f-k filtering of multi-target underwater acoustic data were carried out. The filtering processing results show that the f-k filtering method can separate the multi-target signals that are aliased in the time domain and the frequency domain. And the f-k filtering method also has a certain inhibitory effect on noise, which can effectively improve the signal-to-noise ratio.
In the field of underwater acoustic signal processing, broadband array signal processing is an important research issue, which is more complex than that of narrowband. Broadband passive localization of underwater acoustic sources is investigated in this study. In order to improve the ability to locate multiple radiation sources which are emitted from ships, the orthogonal propagator method (OPM) is proposed to estimate direction of arrival (DOA) for the target. Based on the theory of spatial spectrum estimation, the linear decomposition of the covariance matrix is adopted to form the orthogonal propagator, and the spatial spectrum is constructed according to orthogonality of subspaces. Then, the directions of ship radiation noises are determined by searching the extreme points of the spatial spectrum. For broadband underwater acoustic signals, the non-coherent subspace method is used to average the effective frequency points in bandwidth to reduce noise interference, and OPM algorithm operating in broadband underwater acoustic signal, on arbitrary sonar array, is derived. In order to verify this method, numerical simulations are conducted to test its performance in localization accuracy, beam width and spatial resolution. During the simulations, a uniform linear array consisting of 96 elements is designed. Additionally, comparisons between the proposed method and conventional beamforming technique are conducted. Comparison results show that the OPM method performs better in spatial directivity and spatial resolution.