
To solve the problems of low power transmission and energy conversion rate caused by insufficient resonant frequency tracking performance in the field of high-frequency ultrasonic system, a predictive control technology of ultrasonic system with low control operation amount and high resonant frequency tracking performance is studied to ensure the best sound power output of ultrasonic system in high-frequency rehabilitation treatment scenarios. A back-propagation neural network predictive control model is established with electrical and environmental parameters as input and ultrasonic driving signal frequency as output, together with the Improved Sparrow Search Algorithm(ISSA) is embedded in the system. A simulation of COMSOL and physical experiment platform is built to analyze and verify the control effect. The results show that the technology can efficiently predict the frequency of ultrasonic driving signal, so that the maximum error of output electrical power and sound power is 0.34% and 0.65%, respectively, and the average control time is 0.91s, which provides a feasible control method for high-frequency ultrasonic system in rehabilitation scenarios.
In recent years, various design-time scheduling strategies have been proposed in the design of mixed-criticality systems to ensure the correct and timely execution of high-criticality tasks in emergency modes. However, the gap between typical runtime scenarios and worst-case provisions often leads to inefficient utilization of computational resources. To address this issue, this paper proposes an online low-criticality task degradation strategy based on probabilistic scheduling analysis to optimize task execution in mixed critical multiprocessor systems. This paper details how dynamic adjustments and task degradation during execution ensure the timely completion of high-criticality tasks while maximizing the execution of low-criticality tasks. Experimental results demonstrate that this approach significantly outperforms traditional deterministic scheduling methods in terms of resource utilization and system reliability by incorporating probabilistic scheduling analysis.
This paper explores the integration of Time-Sensitive Networking (TSN) with 5G cellular networks to support high-bandwidth and low-latency end-to-end communication in networked embedded systems. Integrating TSN with 5G has the potential to support predictable and deterministic end-to-end communication, as well as to significantly enhance scalability, particularly in industrial automation, by providing flexibility, efficiency, and responsiveness. To ensure smooth integration while preserving TSN's Quality of Service (QoS) requirements, effective traffic translation and forwarding within the network are crucial. In this regard, this paper addresses key challenges related to traffic translation, QoS implementation, and latency in both TSN and private 5G networks on a realistic scenario. Through experiments, measurements, and evaluation, this paper thoroughly assesses latency and network capabilities in the integrated networks. Understanding these metrics is essential for devising effective integration strategies. Our findings indicate that it is possible to achieve latencies under 20 ms in an integrated TSN-5G network, given our specific configuration of a private 5G setup with a channel bandwidth of 40 MHz. We also identify an urgent need for the implementation of a proper QoS mechanism in the Open Air Interface software to enable the prioritization of high-critical data transmission.
In autonomous driving (AD) systems, it is challenging for a functional module to properly fuse the data flows generated from multiple sensors in a real-time manner. Data fusion performs well when strictly complying with the data dependencies between modules, but meanwhile, the end-to-end latency of critical execution paths (from sensor to controller) may be worsened and become out of bounds. At the other extreme, simply minimizing the end-to-end latency may lead to insufficient data fusion. To tackle this challenging problem, this paper uses the directed acyclic graph (DAG) to model the AD system with multi-source data flows. We apply priority techniques to reduce the end-to-end latency of the critical execution paths and propose an integer linear programming (ILP) based method to derive a reasonable vertex priority assignment such that the end-to-end latency of each critical execution path satisfies its real-time constraint, and moreover, the execution order of vertices determined by vertex priorities keep consistent with data-dependency constraints with best efforts. Experimental work shows that our ILP method can solve the reasonable priority assignment problem for the DAG with hundreds of vertices in a few seconds.
The increasing complexity of functional operations, combined with the automotive industry's extensive collaboration with multiple vendors, presents significant challenges in man-aging software components within automotive systems. While AUTOSAR (AUTomotive Open System ARchitecture) aims to address these issues by enhancing software modularity and reusability, comprehensive studies on end-to-end latency, real-time capability, and timing analysis for safety-critical applications remain limited. This study proposes a chain-aware runnable scheduling framework to enhance real-time performance and reduce end-to-end latency in AUTOSAR-based automotive systems. Experimental results, incorporating priority assignment and runnable allocation, and a case study on real vehicle control units (VCU) of commercial vehicles, conducted using practical scenarios, indicate that the proposed framework reduces the end-to-end latency of the most safety-critical chain by 82% compared to the existing AUTOSAR schedulers.