Despite the age of the technology, sub-Saharan African (SSA) countries have numerous challenges that hinder biogas from being widely adopted. This review investigates the current gap between holistic use and the need for small-scale household biodigester adoption and effectiveness in rural and semiurban households of SSA. It reviews the present situation and potential of small-scale household digesters for sustainable future energy and biofertilizer use, with a focus on SSA. A literature survey was performed on small-scale household biogas digesters, and issues relating to the distribution, use, and implementation status with their implications on the future of small-scale household digesters in SSA were briefly reviewed. In recent years, the overall number of domestic biogas digesters installed across SSA countries has shown a significant increase due to the efforts of the National Domestic Biogas Programs such as the African Biogas Partnership Program with the Netherlands Development Organization and the Humanist Institute for Development Cooperation. However, based on an extensive literature review on small-scale household biodigesters in SSA, the study highlights that the success of biogas technology as a clean domestic cooking fuel has been relatively low. The findings of this review show that SSA countries still face a number of hurdles, the most significant of which can be boiled down to the need for technological advancement according to local context, social acceptance, and large initial investment costs. In order to overcome these obstacles and advance technological capability, social acceptance, financial benefits, and environmental impacts in order to improve its use and widespread dissemination as a renewable energy source, a highly effective organic fertilizer, and economic benefits for the betterment of SSA communities, more well-organized work and adequate research activities should be initiated and supported. The findings may be useful to researchers, practitioners, and policymakers who support/promote sustainable energy and waste management strategies in low-resource settings.
While fossil oil reserves have been receding, the demand for diesel and gasoline has been growing. In recent years, syngas of biomass origin has been emerging as a viable feedstock for Fischer-Tropsch (FT) synthesis, a process for manufacturing synthetic gasoline and diesel. This paper reports the optimization of syngas quality to match the FT synthesis requirement. The optimization model maximizes the thermal efficiency under the constraint of H2/CO≥2.15 and operating conditions of equivalent ratio (ER=0.0-1.0), steam to biomass ratio (SB=0.0-5.0), and gasification temperature (Tg=500°C-1300°C). The optimization model is executed using the optimization section of the Model Analysis Tools of the Aspen Plus simulator. The model is tested using eleven (11) types of municipal solid waste (MSW). The optimum operating conditions under which the objective function and the constraint are satisfied are ER=0, SB=0.66-1.22, and Tg=679-763°C. Under optimal operating conditions, the syngas quality is H2=52.38-58.67 mole percent, lower heating value LHV=12.55-17.15 MJ/kg, and N2=0.38-2.33 mole percent. From an economic point of view, 12.98% to 33.12% of biomass is used as fuel for steam generation, drying, and pyrolysis. The generalized optimization model reported could be extended to any other type of biomass and coal.
Procyclicality has been discovered in crude oil price shocks on aggregate demand. Most studies have used linear estimation techniques, resulting in the loss of asymmetric correlations. We disaggregate the impact of changes in oil prices into positive and negative shocks on aggregate demand and its components from 1970 to 2015 using the nonlinear ARDL framework. The results show that oil price shocks in Ghana have a long-term beneficial asymmetric impact on aggregate demand and its components. Specifically, a positive change in oil price (0.230) has a greater positive effect on the aggregate demand than a negative effect (-0.009) emanating from a negative change in the oil price shock. Further, the same result was obtained for the components of the aggregate demand with the impact on investment expenditures (0.662) being the greatest. Policymakers should diversify energy demand according to our recommendations. Instead of exporting crude oil, officials should encourage its refinement and consumption. Lastly, we suggest that policymakers hedge and use price-smoothing strategies to reduce oil price volatility.
Sugar industries have huge potential to contribute to the sustainable energy transition through electricity generation and production of biofuels. Sugar-producing countries generate huge volumes of sugarcane bagasse as a byproduct of sugarcane production. In this study, the performance of an operating traditional sugar factory is analyzed for electricity generation and export potential. The study presents characteristics and energy potential of modern and traditional sugar factories. The challenges facing a traditional sugar mill are inefficient boilers, less efficient and back pressure steam turbines, and wasteful and inefficient use of steam turbine drives as prime movers instead of modern electric drives for the mills and cane knives. Others are the use of inefficient and energy intensive cane mill rollers instead of the diffusers which have low energy requirements. It was demonstrated that the cogeneration potential of sugar factory is quite significant but currently underutilized. Sugar factories can make significant contribution towards mitigation of greenhouse gas emission mitigation through supply of green electricity to the public grid. The study showed that the factory uses very old and inefficient boilers aged over 39 years which contributes to poor performance and low electricity generation capacity. Modernization is required to increase the generation and electricity export capacity through investment in new and modern high-pressure boilers, replacement of inefficient back pressure boilers (BPSB) with more efficient condensing extraction turbines (CEST), and reduction of factory steam consumption by electrification of mills and cane knife turbine drives among other measures. This study showed that the 3,000 TCD factory can invest in a 15 MW power plant based on current average factory performance indicators and more if the throughput and overall performance is close to design parameters.
Plastics are cheap, lightweight, and durable and can be easily molded into many different products, shapes, and sizes, hence their wide applications globally, leading to increased production and use. Plastic consumption and production have been growing since its first production in the 1950s. About 4% of global oil and gas production is being used as feedstock for plastics, and 3–4% is used to provide energy for their manufacture. Plastics have a wide range of applications because they are versatile and relatively cheap. This study presents an in-depth analysis of plastic solid waste (PSW). Plastic wastes can be technically used for oil production because the calorific value of the plastics is quite comparable to that of oil, making this option an attractive alternative. Oil can be produced from plastic wastes via thermal degradation and catalytic degradation, while gasification can be used to produce syngas. Plastic pyrolysis can be used to address the twin problem of plastic waste disposal and depletion of fossil fuel reserves. The demand for plastics has continued to rise since their first production in the 1950s due to their multipurpose, lightness, inexpensiveness, and durable nature. There are four main avenues available for plastic solid waste treatment, namely, reextrusion as a primary treatment, mechanical treatment as secondary measures, chemical treatment as a tertiary measure, and energy recovery as a quaternary measure. The pyrolysis oil has properties that are close to clean fuel and is, therefore, a substitute to fresh fossil fuel for power generation, transport, and other applications. The study showed that plastic wastes pyrolysis offers an alternative avenue for plastic waste disposal and an alternative source of fossil fuel to reduce the total demand of virgin oil. Through plastic pyrolysis, plastic wastes are thermally converted to fuel by degrading long-chain polymers into small complex molecules in the absence of oxygen, making it a technically and economically feasible process for waste plastic recycling. The process is advantageous because presorting is not required, and the plastic waste can be directly fed without pretreatment prior to the process. Products of plastic pyrolysis are pyrolysis oil, a hydrocarbon-rich gas, with a heating value of 25–45 MJ/kg, which makes it ideal for process energy recovery. Hence, the pyrolysis gas can be fed back to the process to extract the energy for the process-heating purpose, which substantially reduces the reliance on external heating sources.
