
In response to the urgent need for aircraft load simulation in airport pavement research and the issues of existing aircraft load simulation vehicles in terms of operational convenience,load stability,and self-sufficiency,a self-sufficient aircraft simulation loading vehicle design is proposed.Existing vehicles have different design flaws such as no self-propulsion,a high center of gravity,and too many auxiliary wheels.These flaws can result in unstable loading when crossing ruts,a large turning radius,high depen-dence on tractor support,difficulties in relocation and test preparation,and complicated wheel replace-ment.The self-sufficient aircraft simulation loading vehicle designed in this paper is equipped with a single-axle tractor and two spring-loaded auxiliary wheels that share the same axle as the loading wheels.This vehicle also includes triaxial force sensors,a crane,a ladder,and an onboard forklift,which enables the vehicle to load and unload from flatbed trailers and handle counterweights without other mechanical equipment.During operation,its turning radius is less than 10 m.When passing over 150 mm-deep ruts,the loading wheels can bear a load of no less than 150 kN.Moreover,it can collect real-time triaxial load data.With strong self-sufficiency,the vehicle can meet the requirements of loading tests under harsh out-door conditions.
To address the problems of low efficiency, high labor intensity, and significant safety risks associated with traditional manual inspection methods in railway signal equipment rooms, a multi-task visual collaborative recognition framework based on a “backbone detection+task-oriented” strategy is proposed, enabling high-precision identification and condition monitoring of key equipment in signal rooms. Firstly, by analyzing the inspection environment and functional requirements of signal equipment rooms, a unified object detection model based on YOLOv12 is constructed to achieve the classification and localization of main inspection targets, including digital meters, pointer meters and indicator lights. Subsequently, differentiated task-level recognition strategies are designed according to the characteristics of different devices: a fusion recognition method combining the wire-crossing technique and PaddleOCR is adopted for digital meters; a reading method based on image processing and PaddleOCR is applied for pointer meters; and a state recognition method integrating the Hough transform, HSV color space analysis, and PaddleOCR is used for indicator lights. Finally, experimental results on a self-constructed dataset demonstrate that the proposed method achieves accuracies of 94.0%, 92.4%, 91.5% and 94.2% in meter classification, digital display recognition, pointer reading, and indicator light state identification, respectively. Compared with traditional methods, the proposed framework significantly improves recognition accuracy and detection efficiency, exhibiting strong engineering applicability.
Positron emission particle tracking(PEPT)is a novel non-invasive and non-destructive measurement technique for complex multiphase flows in industrial processes.It provides a high spatial-temporal(~ms and~mm)particle dynamic trajectory via the three-dimensional dynamic imaging of various liquid,powder,and particle systems.The physical principles of the PEPT technique are firstly illustrated from three aspects:positron emission,positron detection,and particle tracking.Then,the error sources in PEPT are deeply analyzed,including the influence mechanisms and countermeasures of factors such as false coincidences in LoR,positron flight range,inherent spatial resolution and detection rate of the detector,and tracer particle motion.A guidance for practical PEPT applications is offered in this work,such as PEPT tracer preparation,PEPT measurement setup,and parameter selection of PEPT algorithm.
MEMS metal oxide gas sensors,characterized by rapid response,high sensitivity,compact size,and low power consumption,are widely employed in gas detection applications.However,the per-formance of MEMS gas sensors is easily affected by environmental humidity.To enhance the humidity resistance of gas sensors,based on the hydrophobic polymer material Teflon with high permeability,the hydrophobic and breathable coating of the sensitive layer of MEMS gas sensors is achieved through dip-coating.The hydrogen sensitivity characteristics of MEMS gas sensors,both before and after Teflon modification,are investigated under varying relative humidity conditions.When environmental humidity increases from 10%RH to 90%RH,the response value of the untreated pristine sensor to 400 μL/L hydrogen decreases from 53.07 to 29.51,a drop of 44.4%,whereas the Teflon-modified sensor exhibits a decrease from 28.87 to 26.17,only a 9.4%reduction in response value,demonstrating significant improvement in humidity resistance through the modification process.
To address the need for precise perception of rapidly maneuvering and diverse unmanned aerial vehicle(UAV)models in complex airspace environments,a UAV signal recognition method based on time-frequency multi-channel features is proposed.In the signal processing stage,the UAV signals undergo detrending and denoising to eliminate direct current components and low-frequency drift,thereby reducing frequency-domain interference.The discrete Fourier transform is then applied to extract time-frequency information,followed by spectrum splicing and amplitude normalization to construct energy spec-trum data.To address spatial heterogeneity,multi-channel processing is performed along the frequency domain.For the model architecture,a multi-feature channel signal tensorization strategy is proposed based on an MC-2DCNN,precisely aligning with the model's multi-channel convolutional characteristics.Through spatial decoupling and structured reorganization of frequency-domain features,hierarchical extrac-tion and differentiated modeling of cross-band features are achieved while preserving feature topological adjacency,leveraging channel separation mechanisms to enhance model robustness and generalization.Experiments demonstrate that the proposed method achieves recognition accuracies of 98.15%and 96.32%for UAV models and flight modes,respectively,within the-10 dB to 10 dB noise range.Under aliasing noise scenarios involving electromagnetic noise,comb spectrum,and blocking interference,it attains accuracies of 91.97%and 90.56%,meeting intelligent recognition requirements for UAV detec-tion systems in both civilian and military applications.